What are UTM parameters?

What the five parameters mean, how GA4 works out the channel group from source and medium, and a naming convention a team can keep.

· 9 min readData

Short answer

UTM parameters are tags added to a link that tell GA4 the source, medium and campaign of a visit. Of the five most used, three should be on every link; GA4 works out the channel group from the source and medium values. Use lower case and a closed list of mediums, and keep every link in a shared sheet.

Say that in Monday’s meeting the visits from the newsletter, an Instagram story and a partner link have all landed in the “Direct” row of the report. Nobody can tell whether the campaign worked. The links went out untagged, so GA4 had to guess where each visit came from. That is where the practical answer to “what are UTM parameters and how do you use them” starts: add a short tag to the link that names the source, and do it in the same pattern every time.

UTM parameters are added to the end of a link; when a visitor clicks, the campaign information reaches GA4 together with the page address. For the setup itself, see the GA4 setup checklist; this article covers the tagging routine that sits on top of it. There is also a short definition in the glossary.

What the five parameters say

According to Google Analytics Help, when you add parameters to a URL you should always use utm_source, utm_medium and utm_campaign. The other two covered here are optional; Google’s page also lists further parameters such as utm_id and utm_source_platform. Parameters come after a question mark as “name=value” pairs, separated by &:

https://www.example.com/?utm_source=newsletter&utm_medium=email&utm_campaign=spring-sale

The table below shows what each parameter does and how to fill it in.

Parameter What it says Example value Required
utm_source Where the visitor was sent from newsletter, facebook Yes
utm_medium The marketing medium, meaning the type of channel email, paid_social Yes
utm_campaign The name of the campaign or promotion spring-sale Yes
utm_term The paid keyword shoes No
utm_content Tells apart different links or creatives in one campaign top-button No

Google recommends that if you set one UTM parameter you set all the relevant ones; missing ones show up as “(not set)” in reports. Parameter values are case sensitive: utm_source=google and utm_source=Google are two different values.

How GA4 works out the channel from source and medium

The rows you see in GA4 reports, such as “Organic Social”, “Email” or “Paid Social”, come from Google’s default channel group rules. The channel definitions look at the source and medium values. A few of the rules on the help page:

  • Email: the source or the medium is email, e-mail, e_mail or e mail.
  • Paid Social: the source is on the list of recognised social sites and the medium contains cp, or is ppc, retargeting, or starts with paid.
  • Organic Social: the source is on the social site list, or the medium is one of social, social-media, sm and similar.
  • Paid Search: the source is on the list of search sites and the medium again matches one of the paid patterns.
  • Unassigned: the value GA4 uses when no rule matches.

The figure below shows, with four examples, where the same newsletter or the same Facebook traffic ends up depending on how the medium is written.

Source and medium of four example links, with the GA4 channel group each lands in Source / medium in the link GA4 channel group facebook / paid_social Paid Social facebook / social Organic Social newsletter / email Email newsletter / mail Unassigned Source and medium of four example links, with the GA4 channel group each lands in Top: source / medium in the link Bottom: GA4 channel group facebook / paid_social Paid Social facebook / social Organic Social newsletter / email Email newsletter / mail Unassigned
Figure: GA4 works out the channel from the source and medium values; a medium it does not recognise, such as “mail”, drops the traffic into Unassigned.

Channel definitions are not case sensitive, but the source and medium values in reports are; so although Email and email land in the same channel, they are two rows in the source/medium report. That is why lower case and a closed list are the safest route.

Step by step: a routine the team can keep

  1. Write the medium list once. Six or seven values suit most businesses: email, sms, social, paid_social, cpc, referral, affiliate. A medium that is not on the list is not used; if a new need appears, the list is updated.
  2. Make the source the platform name. facebook, instagram, linkedin, newsletter. Google’s advice is one source value per platform. If one place writes fb and another facebook, the traffic splits into two rows.
  3. Match the campaign to the real campaign name. The name in the ad panel or the calendar and utm_campaign should be identical. Google also recommends one name that matches the campaign exactly, so one effort does not split into several rows.
  4. Lower case, plain letters, hyphens. No spaces: spring-sale, not Spring Sale. Capitals and spelling variants count as separate values.
  5. Use utm_content only where you need to tell links apart. Two buttons in one email are enough reason: top-button and bottom-button.
  6. Do not type the link by hand. Use the UTM link builder, which fills the fields, encodes the address and avoids mistakes with the question mark and &.
  7. Click it once before you publish. Does the page open, and are the parameters still in the address bar?

A single sheet keeps things consistent, not people’s memory. Keep it where everyone on the team can edit, and write each new link into it before publication. The columns we suggest:

Column Why it is there
Target page Which page the link goes to
Source, medium, campaign, content Lower-case values that follow the convention
Full link Copied from the builder, never edited by hand
Where and when it went out Newsletter number, post date, ad name
Owner Who to ask if a question comes up

If you give the “medium” and “source” columns a drop-down list, spelling mistakes are blocked at the door. Do not delete a row when a campaign ends; months later, the sheet tells you which link a row in the report came from.

  • On links between pages of your own site. The visitor is already on your site; giving them a new source tag muddles the real campaign rows in your reports. Use events to measure on-site clicks.
  • With personal data in the link. UTM values sit in plain view in the address bar. Do not put an email address, a name or an order number in them.
  • On pages that do not carry your GA4 tag. A parameter added to a link to someone else’s page writes nothing into your report.
  • On Google Ads ads that have auto-tagging on. See the next section.

Auto-tagging in Google Ads or manual UTM?

According to Google Ads Help, auto-tagging adds a GCLID parameter to the link after a click. Google calls it a required feature: used with conversion tracking or Google Analytics, it lets you see how effectively ad clicks lead to valuable customer activity. It is on by default for new accounts. Google Analytics Help also says that when you use manual tagging and auto-tagging together, GA uses the auto-tagged values for source, medium and the other traffic-classification dimensions. Ads Help puts it this way: in GA4, auto-tagging is prioritised over manual tagging because there is no override option.

In practice: leave auto-tagging on for Google Ads campaigns and do not bother adding UTM to those links. Keep UTM for channels outside Google: newsletters, SMS, social media, partners, other ad networks. The GA4 help also says that where the GCLID cannot be used, if any UTM parameter is present, all source dimensions are derived from UTM alone; so if you write UTM, write all three required parameters.

Reading the result in GA4

Once tagged links are live, open the report here: Reports, Acquisition, Traffic acquisition. According to Google’s help, you can see custom campaign data there as the dimensions “Session source / medium”, “Session medium”, “Session source” and “Session campaign”. The order to check:

  1. Set the dimension to “Session source / medium” and confirm that rows such as newsletter / email arrive spelled as you expect.
  2. Under “Session campaign”, check that each campaign name is a single row.
  3. If there is an “Unassigned” or “(not set)” row, find the matching link in the sheet; most often the medium is misspelt or a parameter is missing.

We explain why GA4 can show different numbers from the ad panel in why GA4 and ad platforms disagree. Because UTM tags are written into the address itself, Google Tag Manager is not a prerequisite here; if you do manage the site’s tags, our Google Tag Manager guide will help. How we read the numbers each week is in the Monday report.

Common mistakes

  • Writing the same channel as email in one campaign and mail in another; the second is not a recognised value.
  • Using capitals and accented letters, and splitting one campaign over several rows.
  • Writing only utm_campaign and leaving source and medium empty.
  • Shortening a link and never testing where the short link goes.
  • Sending a link without writing the campaign name in the sheet, then forgetting a month later what was what.
  • Adding UTM to Google Ads links as well and getting confused about which value is reported.

Common questions

No, the visitor sees the same page. The parameters only carry campaign information. The address looks longer in the address bar, so keep the values short.

Which wins when UTM and GCLID are both present?

According to the GA4 help, when manual tagging and auto-tagging are used together, the auto-tagged values are used for source, medium and the other classification dimensions. Ads Help also says auto-tagging takes priority in GA4.

Can I fix the tags of old campaigns?

You cannot change reported data after the fact. What you can do is write the convention for everything from now on, mark old rows in the sheet as “old naming” and read them together in the report.

There is one thing you can do today: open the “Session source / medium” list in GA4 for the newsletters and social links you sent over the last three months. Count how many different spellings the same channel arrived under. If there is more than one, write the medium list above and apply it from the next link with the UTM link builder. If you would like to set up measurement together, see our data and CRO service.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.