Google Ads bidding strategies: which one, and when

What six strategies from Manual CPC to Target ROAS optimise for, which one fits which stage of an account, the learning period and when to switch.

· 12 min readAdvertising

Short answer

Choose the bidding strategy by the stage of the account: Maximize clicks or Manual CPC without conversion data, Maximize conversions or Target CPA once conversions are measured, Target ROAS once value is measured too. Help’s conversion data page gives the standard learning period as 7 to 14 days; frequent changes reset it.

Picture this: a furniture shop opens its first campaign with “Maximize clicks”, and a month later the panel shows more clicks. How many of them became a quote request is unclear. The owner switches to “Target CPA” in a hurry, changes the target three days later and raises the budget at the weekend. Results swing and nobody can say why. Google Ads bidding strategies are not hard one by one; the hard part is picking the one that fits the stage of the account and then giving it time. This article walks through six strategies, the learning period and the moment to switch, using the Google Ads Help pages.

Setting up the first campaign is covered in how to run your first Google Ads campaign. Here we look only at the bidding decision. We give no amounts; the numbers in the examples are made-up “units”. We used the interface names as they appear on Google’s English Help pages, and they may look slightly different in your account.

The strategy moves along with the stage of the account:

Bidding strategy by account stage: Maximize clicks or Manual CPC at the start, Maximize conversions and Target CPA once conversions are measured, Maximize conversion value and Target ROAS once value is measured 1. Starting out Not enough conversion data Maximize clicks or Manual CPC 2. Conversions Conversions are measured as primary Maximize conversions, then Target CPA 3. Value Conversions have a value assigned Maximize conversion value, then Target ROAS Change one setting per switch, wait out the learning period Bidding strategy by account stage: Maximize clicks or Manual CPC at the start, Maximize conversions and Target CPA once conversions are measured, Maximize conversion value and Target ROAS once value is measured 1. Starting out Not enough conversion data Maximize clicks or Manual CPC 2. Conversions Conversions are measured as primary Maximize conversions, then Target CPA 3. Value Conversions have a value assigned Maximize conversion value, then Target ROAS Change one setting per switch, wait out the learning period
Figure: The strategy follows the stage of the account: clicks or manual bids without data, Target CPA once conversions are measured, Target ROAS once value is measured too.

What the six strategies optimise for

Help’s page on choosing by goal ties the choice to the goal. If you want a direct action on your site and you use conversion tracking, conversion-focused Smart Bidding may be best; if you want traffic, click-focused strategies may fit. The Smart Bidding page names Target CPA, Target ROAS, Maximize conversions and Maximize conversion value as Smart Bidding strategies. The table below puts the six side by side.

Strategy What it optimises Before you start
Manual CPC Nothing automatically; you set the maximum CPC per ad group, keyword or placement If you need to reach a target budget, Help suggests Maximize clicks
Maximize clicks As many clicks as possible within the budget Not suited to a specific Ad Rank or cost-per-conversion goal
Maximize conversions As many conversions as possible, aiming to spend the whole budget Conversion tracking is required
Target CPA As many conversions as possible at the average cost per conversion you set Conversion tracking is required; you can start without conversion history
Maximize conversion value The highest total conversion value within the budget Conversion tracking with transaction-specific values is required; if you spend well below your budget, spend can rise significantly
Target ROAS The highest conversion value at the ROAS target you set Conversions need a value; for Search and Shopping, at least 15 conversions in the past 30 days

The difference between Manual CPC and Maximize clicks is control. According to Help, with Manual CPC you enter a separate bid for each ad group, keyword or placement. With Maximize clicks you set only an average daily budget, and you can put one maximum CPC limit on the whole campaign. The difference between Maximize conversions and Maximize conversion value is the goal: one grows the number of conversions, the other their total value. The Maximize conversion value page gives sales revenue and profit margin as examples of value; which one you choose is your decision.

One detail: from June 2026 Google Ads is changing the labels. According to the Target CPA page, “Maximize conversions with a Target CPA” becomes “Target CPA” and “Maximize conversion value with a Target ROAS” becomes “Target ROAS”, and the behaviour stays the same. During the transition you may see both names in your account.

Choose the bidding strategy step by step

Six steps, followed in order, prevent most of the confusion.

  1. Write the goal in one sentence. Traffic, number of conversions, or value of conversions? If there is more than one, pick the most important. Do not expect one strategy to optimise all of them at once.
  2. Check measurement. For conversion-focused bidding, Help says conversion tracking must be set up correctly and the actions you want to optimise for must be set as “Primary”. The order of setup is in how to set up Google Ads conversion tracking. If measurement is wrong, the strategy multiplies the wrong thing.
  3. Place your account on the ladder. Help says Maximize clicks can be useful for new campaigns that lack enough conversion data for Target CPA or Target ROAS. The same goes when the main goal is website traffic. If conversions are measured, Maximize conversions or Target CPA is next; if value is measured too, Maximize conversion value or Target ROAS. This pairing is our suggestion; Help only gives the conditions.
  4. Review the budget. For Target CPA and Target ROAS, Help recommends being comfortable with spending up to 2 times your average daily budget, and Maximize conversions aims to spend the whole budget. How to decide the budget is in how to set an ad budget.
  5. Do not invent the target; start from Help’s suggestion. See the example below.
  6. Start and leave it alone. The next section covers the learning period.

A note on setting targets: according to Help, if there is historical conversion data, Google Ads suggests the average CPA of the last 30 days (adjusted for conversion delays) as the target. A target that is too low can also cause you to forgo clicks that could have converted and so get fewer conversions in total.

As an example, say 2,400 units were spent in the last 30 days and 40 conversions came in. The average CPA is 60 units. We suggest starting the target at that value and trying lower targets later in small steps. Writing 30 units in the first week risks the “too low” case Help warns about. For Target ROAS, Help’s example is this: if you want 5 units of sales for every 1 unit spent on ads, the target is 500%. Remember that ROAS does not show profit; to think about the target next to ROAS and the break-even point, you can use the break-even ROAS calculator.

What the learning period is

Smart Bidding predicts the bid in every auction. When a strategy is new or has changed, results move until those predictions settle. Help’s conversion data page gives the standard learning period as 7 to 14 days. The same page says frequent manual adjustments to budgets, targets (CPA or ROAS) or conversion goals reset it and delay optimisation. Our advice: change one setting per switch and wait at least two weeks.

In the account, the Status column shows this. According to the bid strategy statuses page, on the Bid strategies page in the Tools menu the “Status” column shows the status of your portfolio strategy. Four of the statuses the page describes are these:

Status What it means, according to Help
Active The strategy is setting bids and no change is needed
Learning Something changed recently; Google Ads is adjusting to optimise bids
Limited Inventory, bid limits, budget or the bidding strategy itself keeps the strategy from fully optimising
Inactive Campaigns are paused or no campaigns are attached to the strategy

The Turkish version of the statuses page says small performance fluctuations may occur during Learning and core metrics may change. It adds that not measuring performance until learning is done can therefore be a good option. The English version of the page does not include those sentences. That version says the Learning status never lasts more than 7 days and that changes to budgets or targets do not trigger it; the Turkish version does not say this. The list of reasons also differs between the two languages, and the conversion data page says frequent adjustments reset the 7 to 14 day learning period. The pages do not describe the same thing in the same way. So do not tie the duration to one number; watch the Status column, and play safe by waiting after a change. If you see “Limited”, hover over it and read the reason.

There is a threshold for evaluation, too. The Smart Bidding page recommends measuring over longer periods with at least 30 conversions, such as a month or more; for Target ROAS the figure is 50. Deciding on one week’s swings is therefore premature. Set the rhythm of decisions as in measure before you raise the budget.

When to switch to another strategy

A switch makes sense the moment the account meets a new condition; the calendar does not force you. In the table below, the second column carries Help’s conditions and the third carries our notes.

Switch Condition Watch out for
Maximize clicks → Maximize conversions Measurement is set up and primary actions are right; the goal moved from traffic to a direct action The strategy tries to spend the whole budget; look at the daily budget first
Maximize conversions → Target CPA You have a specific return-on-investment goal Start from the suggested target; try lowering it later
Maximize conversions → Maximize conversion value Conversions differ in value and the value is measured If you only just started reporting value, Help suggests waiting 1 to 2 conversion cycles
Maximize conversion value → Target ROAS You have a ROAS goal; for Search and Shopping, at least 15 conversions in the past 30 days Keep the target above the break-even point (our note)
Any strategy → Manual CPC You want to steer by keyword, by hand Suits you if you do not need to reach a target budget

Make the switch with an experiment rather than directly on the live campaign. To set the experiment up step by step, see how to set up Google Ads experiments. The Target CPA page says that instead of selecting Save and changing the campaign immediately, you can select “Save as experiment” and compare the new settings against the original campaign. The Smart Bidding page adds that campaign drafts and experiments make it easy to test how well Smart Bidding performs against your current bidding method.

Which strategy is offered in which campaign type varies; for Performance Max, see what Performance Max is and when to use it. If you use broad match, its use with Smart Bidding is covered in match types.

Common mistakes

  • Automated bidding without measurement. If conversion tracking is missing or the wrong action is primary, the strategy learns the wrong goal.
  • Breaking the learning period. Changing the budget, target and conversion goal every few days resets it again.
  • A target that is too low. Pushing the Target CPA down too far makes you forgo clicks that could have converted.
  • Opening Target ROAS without data. Help asks for values on conversions and, for Search and Shopping, at least 15 conversions in 30 days.
  • Deciding on a week of data. Help recommends periods with at least 30 conversions.
  • Staying on Maximize clicks. A click count is not a business result; if conversions are measured, look at the next stage.
  • Changing several things at once. You cannot tell which one worked.

Common questions

Which bidding strategy should a new account start with?

According to Help, Maximize clicks can be useful for new campaigns that lack enough conversion data for Target CPA or Target ROAS. The Target CPA page also says you can start without conversion history. If you have set up conversion tracking, the second is possible; if not, set up measurement first. The choice between the two is yours.

How long does the learning period last?

Help’s conversion data page gives the standard period as 7 to 14 days and says frequent manual changes reset it. The English version of the statuses page, however, says the “Learning” status never lasts more than 7 days. Because the two pages do not give the same number, watch the “Learning” notice in the Status column.

My account says “Maximize conversions with a Target CPA”. Is that a separate strategy?

No. Help says that from June 2026 this name becomes “Target CPA” and the behaviour stays the same. You may see both names during the transition. You do not need to do anything in your account.

One thing you can do today: for each campaign in Google Ads, write down the bidding strategy and the value in the Status column. Portfolio strategies are on the Bid strategies page in the Tools menu. Next to it, add this: how many conversions came in over the last 30 days? If the number is below 30, gather data before deciding; if it is above, look at the table in this article and pick the next stage. If you would like to run the account together, in our advertising service the first thirty days go to measurement and account structure; bid tests then run in a weekly cycle.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 15 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.