Short answer
Google Ads conversion tracking is set up through six decisions: which action counts, primary or secondary, Google tag or GA4, one or every, which value and window, and a test. According to Help, secondary actions are not used for bidding (except in a custom goal); the Status column and your own trial confirm it.
Picture this: the Google Ads panel of a furniture shop shows more conversions than the quote forms that reached the inbox. Two actions in the account count the same form submission: one was set up with the Google tag on the site, the other imports a key event from GA4, and both are primary. The bidding strategy works from the inflated number. How do you set up Google Ads conversion tracking? First you need a sequence of decisions that prevents surprises like this, and this article walks through that sequence using the Google Ads Help pages.
A short summary of setting up measurement before the first campaign is in how to run your first Google Ads campaign. Here we go down to what Help says about each decision. We wrote the interface names as they appear on Google’s English Help pages; some names may look different in your account.
The setup is made of six decisions, and each one is covered in one of the sections below.
Which actions count as conversions
Help asks you to choose a category for each action during setup. The category is the one closest to the user action you measure; if there is no exact match, you choose the next closest. Help also says that grouping related actions such as “Website Purchase” and “App Purchase” into a single conversion goal creates a stronger signal for optimisation (Set up your web conversions).
Before opening the tool, write one question on paper: which action brings the business money or customers? It could be a purchase, an accepted quote request, an appointment or a phone call. Steps such as add to cart or page view can be measured too, but the next decision sets what role they play. We covered the cost of making the wrong action primary in measure before you raise the ad budget.
Primary or secondary
Help’s page on primary and secondary conversion actions defines the difference like this:
| Primary | Secondary (observe only) | |
|---|---|---|
| In reports | In the “Conversions” column | In the “All conversions” column |
| Bidding | Used in bidding if the standard goal it belongs to is used for bidding | Not used; the only exception is an action that is part of a custom goal |
| Conversion created in the Google Analytics interface | Made primary only in Google Ads | Secondary by default when created |
You change the setting like this: in the Goals menu, open Summary under Conversions, find the goal that contains the action, click Edit goal, choose Primary or Secondary (observe only) in the “Conversion action optimization” section, and save. Help calls this setting critical: a wrong configuration can stop Smart Bidding from optimising effectively.
There is one more timing warning. According to the page on understanding your conversion tracking data, Smart Bidding’s standard learning period is 7 to 14 days. The page adds that frequent manual changes to the budget, the CPA or ROAS target or the conversion goals during it reset the period. So set primary and secondary before the campaign goes live. Our own rule of thumb is that one action should be primary for the same business result; that is not Help’s sentence, it is our practice. Once the primary action is set, we explain which bidding strategy fits your account in Google Ads bidding strategies.
Source: Google tag or GA4
The page on setting up web conversions describes two routes: in route A the conversion is created directly with the Google tag, in route B with Google Analytics events. The first steps are shared:
- In the Goals menu, go to Summary and select + Create conversion action.
- For “Conversions on a website”, select Edit data sources, enter your domain and select Scan. The scan detects whether you have a Google tag or a Google Analytics property; you can select both together.
- Choose the category closest to the action you are measuring.
- Select + Create conversion and pick the data source: the Google tag or Google Analytics events.
Route A, the Google tag. It has two methods. Setting up with a URL (“Automatically without code”) counts a page load as a conversion. If you do not need transaction-specific values such as a transaction ID, it is the fastest route, and you pick a “URL is”, “URL contains” or “URL starts with” match for the URL. Setting up manually using code is for when you need to measure clicks on buttons or links, or customise the tag with a value and a transaction ID. The code snippet is added to the site through the Google tag or Google Tag Manager.
Route B, GA4 key events. Help says only events marked as “key events” can be imported. Two Help pages state the access you need differently: the page on setting up web conversions asks for Admin access in Google Ads and Edit access in the linked Google Analytics property. The page on creating conversions from Google Analytics events says admin access to the Google Ads account and at least a Marketer role in Google Analytics. After linking the accounts or marking the event, it can take 24 to 48 hours for the options to appear. According to the second page, auto-tagging also needs to be on in the Google Ads account. After the import, data appears in Google Ads with a delay of up to 24 hours, and history from before the import is not included. For the GA4 side of the preparation, see the GA4 setup checklist.
Help separates the two routes like this: a Google Analytics property suits measurement across app and web, can include conversions from sources other than Google Ads, and is recommended for tracking all traffic on the site. Google Ads conversion measurement suits you if you are interested only in conversions, and it measures only those that come from Google Ads sources. You can also use both at the same time. Making both primary for the same sale, by definition, writes that sale into the “Conversions” column twice; that consequence is our inference.
Setting up with Tag Manager
For actions set up with code, Help’s third method is the Google Tag Manager integration. On the conversion setup summary or the conversion details page, go to the “Use Google Tag Manager” tab and select the “Set up in Google Tag Manager” button. In the tab that opens, choose the container, review the suggested configurations for the Google Ads Conversion Tracking tag, and add them to a new or existing workspace; then define the required triggers and variables and publish the changes. Codeless actions do not support this button; for several manual actions, one button creates multiple tags in a single workspace.
Choosing the right trigger, the preview and the publishing steps are covered in the Google Tag Manager article. To respect the visitor’s cookie choice, see the setup in cookie consent and consent mode. If your site has a plugin that manages tags, Help warns against double-tagging, because it can lead to duplicate conversion reporting.
One or every: counting
For each action you can count every conversion that happens after an interaction, or only one (About conversion counting options). With “Every”, Google Ads counts every conversion after the ad interaction; Help finds this suitable for sales, because every sale adds value to the business. “One” counts only one conversion per ad click and, according to Help, is a good choice when you want to know whether a certain kind of lead was generated rather than how many. If one click leads to 2 sales and 2 leads, with “Every” on sales and “One” on leads you see 3 conversions; that is Help’s own example.
If you make no choice, the default depends on the source. The “Every” default applies to website, in-app actions, Analytics transactions, clicks on your number on the mobile website and imported actions. The “One” default applies to calls from ads, Analytics goals, calls to the number on your site and app installs. You change the setting in Goals > Conversions > Summary by clicking the action’s name, then Edit settings, under Count. The change applies only to later conversions and does not alter past data. If attribution is “Paid and organic channels”, the count setting is managed in Google Analytics.
The page on understanding your conversion tracking data gives a practical rule too: choose “Every” for sales and “One” for leads to prevent double counts caused by page refreshes, and use transaction IDs to deduplicate sales.
Value and conversion window
If you assign values to conversions, Google Ads shows not only the number of conversions but also the total business value they produced. Help gives two ways. Entering the same value for every conversion is easy but may represent the different values of each action less well. If products or services are priced differently, measuring a different value for each conversion is recommended. For that, dynamic values are added to the tracking code, and if they are not added, the default value you entered is applied to all conversions. The value is the input of the Target ROAS and Maximize conversion value bidding strategies; Help says the value can be sales revenue or profit margin, and which one you pick is your decision. If values are missing or fall back to the default, check that “Use different values for each conversion” is selected in the settings and that the variables are mapped. To take the value from an element on the page, Help also describes the CSS selector method.
The conversion window is the period after an ad interaction during which a conversion is recorded. The defaults in Help are: 30 days for click-through conversions, 3 days for engaged-view and 1 day for view-through conversions. Depending on the conversion source, you can set the click-through window between 1 and 90 days; windows of at least 7 days are recommended because they give a richer set of data. If you struggle to choose a window, Help suggests looking at the time lag report in the attribution reports; being able to adjust the window is especially useful for businesses whose buying cycle does not fit the default 30 days. If you shorten the window, conversions after that period are not recorded, and the change applies only to conversions from that day on.
Enhanced conversions, in one paragraph
According to Help, enhanced conversions are a feature that supplements your existing conversion and can improve the accuracy of measurement. It hashes first-party customer data from your website’s tags (such as an email address) with SHA256 and sends it to Google in a privacy-safe way. Google matches it with the Google accounts that were signed in when they engaged with your ad. There are separate types for web and for leads; the second is for measuring offline sales that came from website leads. You switch the feature on in the conversion settings or with the switch in the last step of setup. We described this data’s permission in consent mode (ad_user_data) in our cookie consent article.
Check the status and test
The last decision of the setup is the test. In the table under Goals > Summary, the “Status” column in the action’s row shows how it is working; you can click the status to see the alerts. Help defines five statuses:
| Status | What it means, according to Help |
|---|---|
| Active | Green; everything is working as intended |
| Needs attention | Yellow; there are actions to take, but recording has not stopped entirely |
| Misconfigured | Conversions stopped recording entirely because of a setup error or a broken tag |
| Awaiting conversions | No conversions recorded in the last 7 days; typically the action was created under 48 hours ago, campaigns are paused or traffic is low |
| Removed | The action was deleted or archived and no longer tracks data |
Help also notes that you might not see all of these statuses in your account yet, so the wording in your account may differ.
Test like this: submit a form yourself or make a purchase, then look at the Status column. If the action is new, “Awaiting conversions” is one of the usual reasons Help lists. If you suspect a tag problem, Help recommends Google Tag Assistant or the Tag Manager troubleshooting page. When you compare numbers with GA4, remember that the “Conversions” column assigns the conversion to the click date; for comparing by conversion time there are columns such as “All conv. (by conv. time)”. The reasons for the gaps are in why GA4 and ad platforms disagree.
Common mistakes
- Setting up the same action with both the Google tag and the GA4 import and leaving both primary.
- Double-tagging: the same tag in a plugin, the theme and Tag Manager.
- A GA4 key event name that does not exactly match the name in an action created separately in Google Ads (Help recommends an exact match).
- Choosing “Every” on a lead action and counting thank-you page refreshes.
- Running a ROAS strategy on the default value because the value is not sent dynamically.
- Expecting a secondary action from GA4 to enter bidding.
- Changing conversion goals constantly while Smart Bidding is learning.
- Keeping the window shorter than the buying cycle.
Common questions
What is the difference between a primary and a secondary conversion action?
According to Help, primary actions are reported in the “Conversions” column and used for bidding if the standard goal they belong to is used for bidding. Secondary actions are for observation only and appear in the “All conversions” column; being part of a custom goal is the only exception.
If I change the count setting, does past data change?
No. Help says changes to counting and to the window apply only to later conversions. So the cleanest route is to choose the setting correctly during setup, before conversions accumulate.
What should I do if no conversions show in the panel after setup?
Look at the Status column first. “Awaiting conversions” can appear when the action is new, campaigns are paused or traffic is low. If the status is “Misconfigured”, the tag or the setup is broken. Then trigger a conversion yourself.
The one thing you can do today: open Goals > Summary in Google Ads and note four things for every row. These are whether the action is primary or secondary, whether the count is One or Every, whether the source is the Google tag or GA4, and what Status says. If you see the same action on two rows, that is the first place to fix. If you would like to run the setup together, our advertising service covers connecting conversion measurement as well as setting up campaigns.
Sources
- Google Ads Help: About primary and secondary conversion actions
- Google Ads Help: Set up your web conversions
- Google Ads Help: Create conversions from Google Analytics events in Google Ads
- Google Ads Help: About conversion counting options
- Google Ads Help: About conversion values
- Google Ads Help: About conversion windows
- Google Ads Help: Understand your conversion tracking data
- Google Ads Help: About enhanced conversions
- Google Ads Help: Troubleshooting conversion tracking status
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.