Short answer
Preparing product photos starts with listing the shots a product needs: main image, angles, detail, scale, use. Merchant Center does not accept text, watermarks or borders on the main image; it asks for at least 500x500 pixels (for all products from 31 January 2027, by its own announcement) and recommends 1500x1500 or more. Add alt text and lazy-load below the fold.
Picture this: three people have photographed the products of a shop with two hundred items. One person’s shots have a plain background and the product fills most of the frame. Another’s have the shop logo in a corner. The third shot every product from a single angle and used the same frame for all five colours. The product pages do not look alike, and some of the images sent to Merchant Center raise notifications in its Diagnostics section.
The practical answer to how to prepare e-commerce product photos is a list before the shoot and a check after it. This article covers which shots a product needs, what Google Merchant Center’s image link page says, how to prepare the file and put it on the page, and a sheet your team can repeat for every product. For the rest of the page, see how an e-commerce product page should look, and for the text, how to write product descriptions. Each marketplace publishes its own image rules in its own help pages, so we do not give them here; for Trendyol, how to improve a marketplace listing is the place to start.
There are two kinds of sentence in this article, and they need to be kept apart. On the Merchant Center page, “Image requirements” and “Best practices” are separate headings. An image that does not meet a requirement does not appear on Google surfaces and you see a notification in Diagnostics, while a best practice is advice for doing better. Advice that comes from our own experience and not from a source is marked “our suggestion”.
The six steps below follow this order. The question at the end of each step is the check question in the figure.
1. Decide the shot list
Before the shoot, write down which questions a product has to answer with pictures. The Merchant Center page gives three places here: [image_link] for the main product image, [additional_image_link] for alternative angles and detailed shots, and [lifestyle_image_link] for an in-context or lifestyle view of the product. The table turns those three fields into a shot list; the scale shot and the variant row are our suggestion.
| Shot | The buyer’s question | Where it goes in Merchant Center |
|---|---|---|
| Main image | What product is this? | Image link [image_link] |
| Other angles | What do the other sides look like? | Additional image link [additional_image_link] |
| Detail close-up | What are the material and finish like? | Additional image link [additional_image_link] |
| In use | How does it look in real life? | Lifestyle representation [lifestyle_image_link] |
| Scale shot (our suggestion) | How big is it? | Show it on the page; Merchant Center has no separate field |
| Variant shot | What does my colour look like? | A separate image per variant (best practice) |
If you show the product in its original packaging, the page asks you to make sure the image shows the packaging in several dimensions and not only the front.
Check: does the question customers ask most often about how this product looks match a shot on the list?
2. Shoot the main image to Merchant Center’s requirements
The main image is the first thing people see on Google’s channels, and according to the page it is required for every product. The table below gives the points we read on the page under the page’s own split: image requirement, format limit, recommendation or best practice.
| Topic | Status | What the page says |
|---|---|---|
| Text, calls to action, price, shipping, warranty, adjectives such as “Best”, barcodes and QR codes, watermarks, logos and shop names added afterwards | Requirement | Causes the image to be disapproved; a logo that is an inherent, physical part of the product is allowed |
| Placeholders, “Coming soon” graphics, shop logos, illustrations and mock-ups | Requirement | The image must clearly show the product being sold; generic images are allowed in the Hardware, Vehicles & Parts and Computer Software categories |
| Borders, an image that is only a square of colour, a product not sold with the main product | Requirement | A single-colour image is allowed only in some paint categories |
| At least 500x500 pixels | Format limit | Listed in the formatting specifications; according to the announcement on the page, the new size requirement applies to all products from 31 January 2027 |
| No more than 64 megapixels, file no larger than 16 MB | Format limit | Listed in the page’s formatting specifications |
| Metadata such as IPTC DigitalSourceType on images created with generative AI | Mandatory (own heading) | The image must contain this metadata and the tag must not be removed |
| 1500x1500 pixels or more | Recommendation | For the best performance in all listing formats |
| The product takes up 75% to 90% of the frame | Best practice | A clear view of the main product is wanted |
| A separate image for each variant, one variant per image | Best practice | Avoid group photos of several colours |
The page does not require a particular background colour; the requirements we read concern borders, flat colour squares and text and logos added on top. Choosing a plain background is our suggestion: it makes the requirements easier to meet and keeps the catalogue consistent. The page also says Google may test subtle cropping on your image to frame the product better; leaving the product away from the edges is our suggestion for that reason too. If automatic improvements are turned on in Merchant Center, Google can fix minor issues such as promotional overlays itself, and the page recommends turning them on.
Check: is there anything on the main image other than the product itself, in writing, in objects or in a frame? The answer should be “no”.
3. Tie the catalogue to one shooting standard
When light, background, distance and angle are consistent across the products of one shop, a category page looks orderly. Write a one-page standard before the shoot (the suggestions below are ours):
- The same background, the same light direction and the same distance from the product.
- A fixed shot order: first the main image, second front or side, then detail, scale and use.
- Put the shot number in the file name too, so the second shot always shows the same angle whoever took it.
For variants, the rules are Merchant Center’s best practices: send a separate image for each SKU, make the photo reflect the exact colour, pattern, finish and material, and show only the variant being sold in an image. If you sell a customised product, use the image that shows the customisation. For the term itself, see variant in the glossary.
Check: when the products of one series are placed side by side, shot by three different people, do they look as if they come from the same shop?
4. Prepare the files: format and size
Keep the raw files and a high-resolution master, and make smaller copies from it for the page and the feed (this order is our suggestion). The limits for size are in the table above. For format, three sources need to be read together.
- Merchant Center: The supported formats are JPEG, WebP, PNG, GIF, BMP and TIFF. The file extension should match the format; using .jpg for a .png file can lead to “Unsupported image type” errors. AVIF is not on the list, so we suggest using JPEG or WebP at the address you give the feed.
- Google Search: For images referenced in
src, BMP, GIF, JPEG, PNG, WebP, SVG and AVIF are supported. - web.dev: For decades JPEG has almost invariably been the right choice for photographs. AVIF aims at better perceptual quality at file sizes smaller than JPEG or WebP, but web.dev says WebP support is excellent across modern browsers yet not a given across the whole web, and AVIF is newer still. A browser that cannot parse a format shows nothing, so when you use a new format, provide a fallback JPEG or PNG.
With formats such as JPEG and WebP, compression is controlled by a single quality setting from 0 to 100. web.dev says tools do not all interpret the same number the same way. It also says that nudging JPEG compression a little lower than you think might be noticeable is almost always a safe bet, especially when the image is displayed smaller than its intrinsic size. Our suggestion is to check the product’s finest detail, such as fabric texture, by eye in the output.
The page has three more notes for the feed address. Do not use timestamps or session IDs that change with every submission. Let your robots.txt allow both Googlebot and Googlebot-image (a change can take 24 to 48 hours to take effect), and write the address in ASCII characters.
Check: does every address sent to the feed open a single valid file whose extension matches its format?
5. Put it on the page properly
How an image is placed on the page affects both whether Google finds it and how fast the page is. For speed details there is how to speed up a website; here we gather only the rules that concern product photos. We cover the image SEO steps for any kind of site, including alt text, lazy loading and image sitemaps, in how to do image SEO.
- Use
<img>. Google can find images in thesrcattribute of the<img>element; it does not index CSS images. - Offer responsive sizes. The Search Central page describes
srcsetand<picture>, but says some browsers and crawlers may not understand them, and recommends always giving a fallback address insrc. - Write
widthandheight. web.dev says you should always usewidthandheighton<img>, with values matching the image’s intrinsic size, and that this avoids layout shift caused by images. - Lazy-load what is below the screen.
loading="lazy"delays the request for an image until it is near the viewport. Do not use it on an image at the top of the page, above all on the largest content element (LCP); web.dev says that is likely to hurt LCP badly. On most product pages the main product photo is exactly there. - Always refer to the same image by the same address. Google says that if an image is referred to with the same URL across your site, it can cache and reuse it.
Check: is the main product photo in the page’s HTML as an <img>, and is it not lazy-loaded?
6. Write the alt text and the file name
According to Google’s image SEO page, Google gets the subject of an image from the content of the page, including captions and image titles, so placing images near relevant text matters. The file name gives “very light clues”: a short, descriptive name such as black-leather-backpack-front.jpg is better than IMG00023.JPG, and generic names such as image1.jpg should be avoided. The page calls alt text the most important attribute for providing metadata about an image. It helps people who use screen readers or have low-bandwidth connections, and Google uses it together with computer vision algorithms and the content of the page. Alt text should be useful, information-rich and in the context of the page; stuffing it with keywords gives a bad experience and may make the site look like spam. The glossary has a short definition of alt text.
In practice for a product photo (our suggestion): product name, colour or variant, and what you can see in the frame. For example, “Black leather backpack, front pocket open”.
Check: could someone who reads only the alt text tell what is in the image?
The shoot sheet your team fills in for every product
The list below is a one-page sheet for one product: the person shooting fills it in and the catalogue owner checks it.
- Product name, SKU and list of variants.
- The shot list: main image, angles, detail, scale, use; a tick on each row.
- No text, logo, border or watermark on the main image; no placeholder used.
- The product takes up roughly 75% to 90% of the frame; the master copy is 1500x1500 pixels or more.
- A separate image for each variant; only the variant being sold in the frame.
- The exported file is JPEG or WebP; the extension matches the format; the name carries the shot number and the product.
- On the page:
<img>,widthandheight, andloading="lazy"on everything below the first screen. - Alt text written.
Common questions
Is a photo taken on a phone good enough?
The Merchant Center page asks about pixels, not the device: at least 500x500 pixels (for all products from 31 January 2027), preferably 1500x1500 or more. If the phone meets that, the device is no obstacle; Search Central also says sharp, high-quality photos appeal to users more than blurry ones, so check sharpness separately.
Is a separate photo for every variant required?
The page lists it as a “best practice”: submit a unique image that represents the distinguishing details of each variant. What it writes as a requirement is not to reuse a placeholder or one general image across multiple distinct products.
Can I write “Free shipping” on the photo?
Not on the main image: offers such as price, discounts and “Free shipping” are among the things the Merchant Center page says to avoid. Give that information in the text of the product page. The page writes these requirements for the main image link; for the rules on additional images, check the help page for that attribute.
One thing you can do today: open the image address of your best-selling product in a browser, save it, and fill in the shoot sheet above for that product. The number of empty rows shows where your shooting standard is missing something. To understand the Merchant Center side, start with what Google Merchant Center is. If you want a catalogue-level audit, the catalogue audit in our e-commerce service includes reviewing product data, variants and images; the details are on our e-commerce service page.
Sources
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 14 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.