Short answer
For Shopping ads, link your Merchant Center account to Google Ads, add products to the feed and set up conversion tracking. Then create a Shopping campaign. Ads are matched on feed data, not keywords, and you bid through product groups.
You reach the “Select your Merchant Center account” step in the campaign wizard and the list is empty. The products sit in Merchant Center, but your Google Ads account knows nothing about them. So the first answer to how to run Google Shopping ads looks routine but cannot be skipped: link the two accounts first. Google Ads Help’s page on creating a campaign says that if you see no accounts listed, you need to link your Merchant Center and Google Ads accounts first. This article starts there and goes in order, as far as the first product group and reading the first report. We give no budget figures.
The account and the feed are a subject of their own, covered in what is Google Merchant Center. This article deals only with the advertising side.
Three conditions before you start
Shopping ads need three things in place. The table below shows what each one asks for and where to check it.
| Condition | What Google Ads Help says | Where you check |
|---|---|---|
| Linked accounts | The Google Ads and Merchant Center accounts must be linked for a Shopping campaign; the linked Merchant Center account cannot be changed after the campaign is created | The Merchant Center list in the campaign wizard |
| Products in the feed | To run a Shopping campaign effectively, you need to add products to your Merchant Center feed | The product list and the Needs attention tab in Merchant Center |
| Conversion tracking | Without conversion tracking enabled, Google Ads may limit campaign spend | The status of your conversion actions in Google Ads |
There is no waiting period after linking. According to the onboarding guide, it may still take a few hours or even a few days for products to show in Google Ads, because Google Ads has to crawl your Merchant Center account and index the products. A product that is disapproved will not show in Shopping ads either; we covered the reasons in our Merchant Center article. For setting up conversion tracking, see how to set up Google Ads conversion tracking.
Standard Shopping or Performance Max?
Shopping ads can run in two campaign types. The “About Shopping ads” page compares them in a table; below we summarise the rows for where ads show, ad assets and bidding strategies.
| Topic | Standard Shopping | Performance Max |
|---|---|---|
| Where ads show | The Shopping tab, beside results on Google Search, Google Images; Search partner sites if the campaign is set up that way | Most channels: in addition, Search text ads, the Display Network, YouTube, Gmail, Demand Gen and Maps |
| Ad assets | Created and optimised from the Merchant Center feed; extra text, images or video are not available yet | Created and optimised from asset-group text, images and video plus the feed |
| Bidding strategies | Target ROAS, maximise clicks, maximise conversion value, manual CPC | Maximise conversions (with an optional target CPA), maximise conversion value (with an optional target ROAS) |
You can also run both for the same products. According to the onboarding guide, if their targeting overlaps, Ad Rank decides which campaign serves, and an A/B experiments tool can compare them. The same guide presents Performance Max as the best way to maximise online sales, which is Google’s own assessment. We suggest this: if you want bid control by product group and your measurement is still settling in, start with Standard Shopping. What Performance Max asks for is in what Performance Max is and when to use it. The setup steps below are for Standard Shopping.
Step by step: a Standard Shopping campaign
The steps follow the order on the Help page for creating a campaign. Menu names are as in the English Help page; your account may differ slightly.
- New campaign. In Google Ads, select the plus button, then New campaign. The goal list offers Sales, Leads, Website traffic and Local store visits and promotions; you can also create a campaign without a goal’s guidance. For online sales, we suggest Sales.
- Campaign type: Shopping. The wizard also offers Performance Max here. For Standard, continue with the Shopping campaign.
- Merchant Center account. Select the account that holds the products; this choice cannot change once the campaign exists. If you wish, a feed label limits the campaign to products from particular data sources.
- Bidding and budget. Help tells you to select automated bidding for Shopping campaigns, and you can change it later. If you choose manual CPC, you enter the bid at ad group level. Set the daily budget against your own margin. Campaign priority is needed only if you advertise the same product in several campaigns.
- Locations and networks. “All countries and territories” shows ads only in the countries where your products are sold. By default, ads show on the Google Search Network and Search partners; untick the Search partners box to exclude them.
- First ad group. Name the group. Edit the product groups field only if you want to limit how many products the campaign uses.
- Review and publish. Check the summary and select Publish campaign.
- Check after publishing. Help suggests monitoring the status and using the Ad Preview and Diagnosis tool. According to the onboarding guide, the policy review of a new campaign takes 1 to 2 days and the learning period can take up to 2 weeks; performance may fluctuate in that time. We suggest not changing settings every day.
How products are grouped and bid on
A Shopping campaign has no keywords. According to the product groups page, you bid with product groups in the ad group, using your inventory. A product group is a subset of your inventory that you define, and every product in it uses the same bid. When you first create the campaign, the ad group has a single group called “All products” that holds your whole inventory. Help recommends splitting it into smaller groups to make bidding more specific to your goals.
The rules for splitting, from the same page:
- You can subdivide each product group up to 7 levels. A subdivided group cannot take a bid; groups that are not subdivided can.
- Each ad group can hold up to 5,000 product groups.
- Groups are defined only by attributes in your Merchant Center data: item ID, brand, category, product type, condition, custom labels, channel and channel exclusivity. Product type can be subdivided up to five times, and you can create up to five custom labels.
- A product that is not in an active group shows as “Excluded” in Google Ads. To be eligible for ads, a product has to be part of a product group.
- If you change attributes in the feed, the change does not reach your product groups by itself; you must update the groups in the ad group.
We suggest this: split first by brand or category, then define a custom label in the feed for higher-margin products and put them in a group of their own. The example label values in Help are “seasonal” and “bestseller”; choose the value that fits your own decision. For which automated bid strategy suits which case, see Google Ads bidding strategies.
The feed decides which searches you show for
According to Help, Shopping ads use your Merchant Center product data, not keywords, to decide how and where your ads show. Those details are used when a user’s search is matched to your ads, so that the most relevant products appear. Google may also use content from your landing page, images and feed to enrich your ads, and you can ask your account manager to opt out of those optimisations.
The practical result is that changing the searches you show for goes through the feed. Merchant Center Help’s title page says the title is used to match your product to a customer’s search. It recommends using all 150 characters, putting the most important details first (users usually notice only the first 70 characters or fewer) and adding the brand name if it is a differentiating factor. We suggest putting the name a customer would type, the brand, the model, the colour and the size in the title, and also filling colour and size in their own attributes. For searches you do not want, Help says you can create campaign-level negative keywords in Standard Shopping campaigns.
The figure follows the chain from start to finish.
Reading results by product
The strength of Shopping reports is their level of detail. Help says you can see how your products perform at any level of detail you want. By filtering the products view alone, with no new product groups, you can see the clicks for one brand. Impression share data and the bid simulator are also listed as ways to find room to grow. According to the onboarding guide, if you have set up conversions with cart data, you can also review revenue and profit in reports.
Two things to watch when you read them:
- Impression counts may not match. According to Help’s product groups page, the Product groups tab reports only product-level data. If a Shopping ad shows many products in one slot, each product gets an impression, while the campaign, ad group and ad count a single ad. So the gap between tabs is not an error.
- Why is a product not showing? The product diagnostics page in Google Ads tells you what is stopping products from showing. The problem may sit in the feed or in the product groups.
We suggest sorting product groups by conversions and value once a week; click counts alone are a poor guide. Lower the bid on a group that gets clicks but does not convert, or exclude the group from the campaign; Help notes that a product group can be excluded. If your measurement is incomplete, go back to the steps in Google Ads conversion tracking first.
Common mistakes
- Starting a campaign before linking the accounts, or creating it with the wrong Merchant Center account; the account cannot be changed afterwards.
- Going live without conversion tracking; Help says spend may be limited.
- Leaving the single “All products” group unsplit and bidding the same on every product.
- Changing attributes in the feed without updating the product groups.
- Leaving titles generic; according to Help, the title is used to match a product to a customer’s search.
- Changing settings every day because of fluctuation in the first two weeks.
- Running the same products in Performance Max too and not watching which campaign serves.
Common questions
Can I run Shopping ads without Merchant Center?
No. Shopping ads take their product data from Merchant Center. Help asks you to add products to Merchant Center first and then create a campaign in Google Ads to advertise them, and the two accounts have to be linked.
Do I need to add keywords for Shopping ads?
No. Shopping ads use product data from the feed instead of keywords. You set bids on product groups, and you can add negative keywords for searches you do not want.
Can Standard Shopping and Performance Max run at the same time?
Yes. You can set up two campaigns that target the same products. If location, language and other targeting overlap, Ad Rank decides which one serves; Google’s A/B experiments tool lets you compare their performance.
One thing you can do today: look at the product groups of your current or planned Shopping campaign in Google Ads. If there is still only “All products”, split the inventory by brand or category. Then open the title of your best-selling product in Merchant Center and check that the product name, brand and model fall within the first 70 characters. Managing the product feed and Shopping campaigns by product margin is the work of our advertising service; the product catalogue and its content are handled in our e-commerce service.
Sources
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 15 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.