What is GA4, and how to read its reports

From the words users, sessions and key events to the three reports that answer “where do my enquiries come from?”, and a reading routine for once a month.

· 10 min readData

Short answer

GA4 is the version of Google Analytics that records what happens on your site as events. Traffic acquisition, User acquisition and Landing page show where enquiries come from; in all three, look at the Key events column. Reading them in the same order once a month makes the numbers easier to interpret.

At the month-end meeting someone puts the GA4 screen up. The number of users is smaller than the number of sessions, there is a column called “engaged sessions”, and the enquiries from the form match none of the columns. Nobody knows which number to look at, and the meeting turns into an argument about whether ads or organic search work better. The practical answer to “what is GA4 and how do I read its reports” starts here: first learn the exact meaning of a few words, then look at the same three reports in the same order every month.

GA4 is the current version of Google Analytics, and it records what happens on your site as events; there is a short definition in the glossary. This article assumes the property is already installed. If you haven’t checked the setup yet, start with the GA4 setup checklist, because reading the reports of a badly set-up property leads to wrong conclusions.

Four words: user, session, engaged session, key event

Most reports are built on these four words. The table below puts Google Analytics Help’s definitions beside what each one means for a business.

Word Google’s definition In practice
Active user The number of distinct users who visited your site or app; a user with an engaged session, or a first-time visitor, counts as active The answer to “how many people came?”
Session The number of visits that began on your site; by default a session ends after 30 minutes of inactivity If the same person comes three times, that is three sessions, so sessions can outnumber users
Engaged session A session that lasted 10 seconds or longer, had 1 or more key events, or had 2 or more page views Filters out people who arrive and leave at once; engagement rate is engaged sessions divided by all sessions
Key event An event that measures an action particularly important to your business The action you mark: a form submission, a call click, a purchase

GA4 cannot know by itself which event matters; you mark it. According to Google, any event can become a key event. For more, see the key event entry in the glossary. Engagement rate is the inverse of the old bounce rate. If no key event is marked, the most valuable column in the reports below stays empty.

The left-hand menu: acquisition, engagement, monetisation

Three headings in the Reports section matter to you.

  • Acquisition: shows where visitors came from. This is where you look for the source of an enquiry.
  • Engagement: shows what visitors did on the site, which page they entered on and which pages they viewed.
  • Monetisation: gathers ecommerce data such as products, orders and revenue. It fills only if the site sends ecommerce events; for a business that works through enquiry forms there may be nothing to read here, and the key event columns do the same job.

If a report is missing from the menu, Google notes that it may have been removed or is not in your default view; someone with editor rights can add it back.

The three reports that answer “where do enquiries come from?”

The steps below assume you have a key event such as an enquiry form, an appointment or a call click.

  1. Traffic acquisition. Open Reports, Acquisition, Traffic acquisition. The report shows where new and returning users come from, and its “Session” source dimensions describe the source of that session. In the table, look at the Key events and session key event rate columns. To see one source, type something like “google / organic” into the search bar.
  2. User acquisition. It differs from Traffic acquisition in that it shows only where new users came from. If a channel brings many sessions but few new people, the difference shows here.
  3. Landing page. Open Engagement, Landing page. The report shows the first page a visitor viewed in a session and how many people entered on each page. The Key events column separates the pages that bring enquiries from those that only get visits.
Three GA4 reports that answer where enquiries come from: Traffic acquisition, User acquisition and Landing page; in all three, look at the Key events column Where do enquiries come from? Traffic acquisition Which channel brought them User acquisition Where new visitors came from Landing page Which page they entered on Check the “Key events” column in all three Three GA4 reports that answer where enquiries come from: Traffic acquisition, User acquisition and Landing page; in all three, look at the Key events column Where do enquiries come from? Traffic acquisition Which channel brought them User acquisition Where new visitors came from Landing page Which page they entered on Check the “Key events” column in all three
Figure: Three reports answer where enquiries come from, and each one ends with a read of the Key events column.

To see one key event on its own, choose the form submission from the “All events” menu above the table; the figures are recalculated for that action only. Read the three reports together and you can say: “Most enquiries come from this channel, from people who entered on this page.” It is normal for the channel to look different in the ad platform; we explained why in why GA4 and ad platforms disagree.

Comparisons and date ranges

One month’s figure says little on its own. In the date picker at the top right of a report you can choose a preset or a custom range, and choose “Compare” to see it beside the previous period. Choosing the previous period that matches the day of the week is the cleanest way to set a month that starts on a Monday against another that starts on a Monday. Changing the date range affects only your own screen; other users keep their own range.

Comparisons slice the data by dimension values. For example, you can set mobile traffic beside all traffic. Google adds ready-made comparisons for direct, organic, web and mobile traffic to the property. If you save your own comparison, everyone with access to the property can use it.

Explorations in one paragraph

When the standard reports cannot answer a question, Explorations is the next step. In Google’s words it is a collection of techniques that go beyond the standard reports: you run ad hoc queries, apply filters and segments, and share or export the results. For example, a path analysis shows which pages visitors went to after a landing page. You don’t need it for the monthly routine; open it when the standard reports fall short. And remember that if the data retention period is short, older data does not show up in explorations.

Data thresholds and “(not set)”

Two expressions are often misunderstood.

Data thresholds. To prevent the identity or sensitive information of an individual from being inferred, Google withholds some data. The system defines the thresholds and you cannot adjust them. Rows with demographic data or search queries are affected most often. The data quality indicator at the top of the report warns you. With few users and a narrow date range, a threshold is more likely; widening the range often brings the rows back.

(not set). Analytics writes (not set) as a placeholder when it has received no information for a dimension. The causes depend on the dimension. For manually tagged links, incomplete or wrong UTM parameters are among the usual ones, along with a Google Ads account that isn’t linked to Analytics or auto-tagging being switched off; for session source, the session_start event may be missing. Google notes this can happen when the Google tag in Tag Manager does not fire on the “Initialization” trigger. We explained the tag layout in our Google Tag Manager guide; to keep link tags tidy, see our UTM guide or the UTM link builder.

Three questions before you interpret a number

Don’t draw a conclusion just because a number in the table moved. First ask:

  1. Does the key event fire at the right moment? A button click is not the same as a successful submission; check the setup against the checklist.
  2. Are the two periods alike? A holiday, a campaign or a change on the site can move a month’s figure on its own. Note what happened at the start of the period you are comparing.
  3. Is the number small? On a site that gets a handful of enquiries a month, losing one looks large as a percentage. Write the percentage together with the real count, never alone.

A reading routine for once a month

On the first working day of each month, set aside twenty minutes and follow the same order.

  1. Set the date range to last month and compare it with the previous period.
  2. In Traffic acquisition, note the key event count by channel.
  3. In User acquisition, mark the channel that brings new people.
  4. In Landing page, write down the three pages that bring the most enquiries and the three that get visits but no enquiries.
  5. Look at the “(not set)” and “Unassigned” rows; if they have grown, check your link tags.
  6. Write a three-sentence note: what went up, what went down, what we will change this month. We described the weekly version in the Monday report.

Common mistakes

  • Expecting enquiry counts from the reports without marking a key event.
  • Counting users and sessions as the same thing; one person can open many sessions.
  • Deciding on one day’s or one week’s figures.
  • Taking a missing row in a narrow date range for lost data; it may be a data threshold.
  • Ignoring the “(not set)” row.
  • Interpreting a small site’s figures without filtering out internal traffic.

Common questions

Why is the number of users smaller than the number of sessions in GA4?

One user can come several times, and each visit can be a separate session. A session ends after 30 minutes of inactivity. So if the same person comes three times in a month, that is one user and three sessions.

Is there a bounce rate in GA4?

Google states that engagement rate is the inverse of bounce rate. Engagement rate is engaged sessions divided by all sessions; subtract it from 100% and you arrive at the bounce rate.

What should I do if a row is missing or a number is lower than I expected?

First widen the date range and look at the data quality indicator; a threshold may have been applied. If the problem persists, check setup causes such as cookie consent, the tag loading twice, or an unmarked key event.

One thing you can do today: in GA4 open Reports, Acquisition, Traffic acquisition, set the date to last month, and write down on a sheet of paper which channel has the most in the Key events column. If the column is empty, the problem is an unmarked key event rather than the report. If you would like to set up this check and the monthly reading together, it falls within our data and CRO service.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.