Short answer
To run Instagram and Facebook ads, first gather the Page, Instagram account, ad account and pixel in your own business portfolio, then choose the objective, conversion location and performance goal in Ads Manager. Meta says an ad set usually leaves the learning phase after about 50 results; judge the test by that.
On Monday morning you tap the Boost button under last week’s best-liked product photo, pick a duration and confirm the payment. Three days later the likes have gone up and there are no orders. Running Instagram and Facebook ads does not end with that button; it starts there. You need to decide beforehand which account the ad runs from, which objective it aims at and how you will measure it. This article opens a first campaign step by step. We give no budget figures; that decision depends on your margin.
The Boost button and Ads Manager are not the same thing
Meta’s help page describes a boosted post as an ad created from an existing post on your Page. It sets this apart from creating a new ad, which starts with new creative that has not been published on your Page before. You follow its results in the Ad Center tab of your Page. Meta’s page on choosing an objective adds that ad goals in Ad Center, Meta Business Suite or Instagram, such as “get more messages” or “get more website visitors”, are simplified packages. These packages set the campaign objective, conversion location and performance goal in the background. Once you move to Ads Manager, you choose those three settings yourself.
The table puts the two side by side.
| Boost button | Ads Manager | |
|---|---|---|
| Starting point | A post you have already published | A campaign, ad set and ad built from scratch |
| Objective, conversion location, performance goal | You pick a package and the three are set in the background | You choose all three |
| Where you read results | Ad Center on your Page | The reports in Ads Manager |
| When it makes sense | Showing an already well-received post to more people | Wanting a measurable result such as a sale, form or appointment |
The button is not bad; it does a different job. If you want sales or leads, Ads Manager is where you can see the settings.
Step 1: Gather your accounts in your own business portfolio
According to Meta’s documentation, a business portfolio brings assets such as a Facebook Page, an Instagram profile and an ad account into one place. Whoever has full control of the portfolio can share those assets with partners such as an agency. You can give a partner full control of an asset or partial access; even a partner with full control cannot share the asset with another business, because only its owner can.
In practice:
- Set the portfolio up in your business’s name and do not leave full control with a single person.
- Add the Page, the Instagram account and the ad account to it, and set the payment method up with your business details.
- If you work with an agency, add it as a partner with the access it needs. If the account has been in your portfolio from the start, the account and its history stay with you on the day you part; we cover the handover in changing your ad agency.
Step 2: Set up the pixel and the Conversions API
Meta has to be able to see what happens on your site. The Meta Pixel is code on your site that reports actions such as page views, adds to basket and purchases to Meta through the browser. The Conversions API sends the same kinds of events to Meta directly from your server, site platform or CRM.
Meta’s documentation says data from the Conversions API is less affected than the pixel by browser loading errors, connectivity problems and ad blockers, and that using the two together gives a more reliable connection. It also says many integrations do not need a developer. If the same event travels both ways, it is given a shared ID so that it is not counted twice; we cover this in why GA4 and ad platforms disagree.
Before the campaign, test it by hand: send a test form or a test order from the site and check that the event appears in Meta once. Why measurement comes before budget is in measure before you raise the ad budget.
Step 3: Choose the objective by the result you want
Meta’s help page lists six simplified objectives. The table summarises its descriptions.
| Objective | Meta’s description | When to choose it |
|---|---|---|
| Awareness | Reaches the people most likely to remember your ad | The business is new or has just changed its name |
| Traffic | Sends people to a destination such as a Page, site or app | You want visitors |
| Engagement | Finds people likely to message you or act on your ad | You want conversations |
| Leads | Collects leads through messages, phone calls or sign-ups | You are after forms, appointments or quote requests |
| App promotion | Gets people on mobile devices to install your app or act in it | You have an app |
| Sales | Finds people likely to buy; can also optimise for other actions such as add to basket | You want sales from your site |
If you want sales, Traffic brings visitors; it does not look for orders. Under the objective you also choose the conversion location (your website or a messaging app) and the performance goal. For a first campaign, one objective and one conversion location are enough.
Step 4: Audience, creative and copy
The following is our working method, not a platform rule.
- Audience: Start with one clear audience. A very narrow audience makes the learning threshold in the next step harder to reach; Meta lists a small audience among the causes that limit learning.
- Creative: Build a small set that presents the same message in three different images or videos. Running too many ads at once is another of the limiting causes Meta lists.
- Copy: One offer and one call to action per ad, and an opening sentence that says what the product is.
Step 5: Write down how long the test will run
According to Meta’s page on the learning phase, when you create a new ad or ad set, or make a significant edit to an existing one, the delivery system starts learning how to deliver it. The Delivery column reads “Learning” during this time. Ad sets usually leave the learning phase and deliver stably after about 50 results following their last significant edit.
Under the “Learning limited” page, an ad set gets that status when it looks unlikely to receive about 50 optimisation events in the week after its last significant edit. Meta describes this as an indication that the budget is not being spent effectively with the current setup, not as a penalty. The causes it lists include a small audience, a low budget, a low bid or cost control, auction overlap, an infrequent optimisation event and too many ads at once.
The rules for your test follow from this:
- Write down before you start which result you will look at and on which date you will decide.
- Wait at least one full week. A verdict of “it doesn’t work” on day three is a verdict on a system that has not settled.
- Do not change the audience, creative or optimisation event in that time. The “Last significant edit” column in Ads Manager shows the last change that could reset learning.
- If 50 results a week are out of reach, try widening the audience, cutting the number of ads or optimising for a more frequent event than purchase, such as add to basket, one at a time and in writing.
Step 6: Read the results
The eye-catching numbers in a first report are impressions, clicks and likes. For a decision, look at these:
- The number of primary results and the cost per result: a sale, a qualified form or an appointment.
- The same week’s counterpart in the till or CRM. Platforms credit sales to themselves under their own attribution rules, so the dashboard and the till will not match exactly; the gap should be explainable and similar from week to week.
- Whether the cost per order fits your margin; the break-even ROAS calculator shows this with your own figures.
Use the layout of the Monday report to keep the numbers on one page a week.
If results are weaker than you expected, look in this order: measurement first (is the event arriving correctly, and once), then learning status (is the ad set “Learning limited”), then creative, and audience last. The order is deliberate: changing the creative while measurement or learning is the problem is searching in the wrong place. Make one change per round and write it down with its date; that is the only way to tell which change did what.
Common mistakes
- Tying access to one person. If the accounts depend on one employee’s personal setup, there is trouble when that person leaves.
- Spending before measurement is set up. If the event is missing or double-counted, the system learns from the wrong signal.
- Choosing Traffic when you want sales. You get clicks; orders do not follow by themselves.
- Changing settings all the time in the first days. Each significant edit can restart learning.
- Judging a boosted post by sales. The say over objective and conversion location sits in Ads Manager.
Common questions
Is starting with the Boost button wrong?
No. It suits showing an already well-received post to more people. If you need to choose the objective, conversion location and performance goal yourself, move to Ads Manager.
If I give the work to an agency, who keeps the account?
If you open the account in your own business portfolio and add the agency as a partner, the account stays with you. You give the partner full control or partial access, and you can change that access later. Ask the agency about it plainly before signing.
After how many days can I stop the campaign?
Meta’s yardstick is about 50 results in the week after the last significant edit. Deciding before a week has passed means judging a system that is still learning. If you cannot reach the threshold, review the setup (audience, event, number of ads) first.
One thing you can do today: open your Meta business settings and check which portfolio holds your Page, Instagram account and ad account, and whether anyone on the list is a stranger to you. If an asset is not in the portfolio, adding it is the first job of the first campaign. If you would rather run the process with an agency, the Meta ads management and advertising pages describe how the first 30 days work.
Sources
- Meta Business Help Centre: About boosted posts
- Meta Business Help Centre: How to choose the right ad objective in Meta Ads Manager
- Meta Business Help Centre: Give a partner access to business assets in your business portfolio
- Meta Business Help Centre: About Conversions API
- Meta Business Help Centre: About the learning phase
- Meta Business Help Centre: About learning limited
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.