Short answer
Updating old content starts with deciding what to do with each page: update it if the information is out of date, merge it and 301-redirect the old one if two pages answer the same question, leave it alone if it is doing well. Candidates come from lost clicks in Search Console; renew the date only if the content really changed.
Picture this: in Search Console, three posts have fewer clicks than a year ago. One is a guide written two years ago, one describes a step that no longer applies, and the third is one of two pages that answer the same question. The first reflex is to say “let’s update them all”, but the three need different work. The answer to how to update old content is to decide first what each page needs: update, merge, redirect or leave alone. In this article we go through finding the candidates in Search Console, making the decision with a table, what changes in an update, what Google says about dates, merging two pages and checking the result.
1. First confirm the drop is real
Not every loss of clicks is a content problem. Google’s guide to debugging traffic drops lists the possible causes of a drop: an algorithm update, a technical issue, seasonality and more. In Search Console, open the Performance report, choose Search results, and do the following:
- In the Date filter, choose Last 16 months. The guide suggests this so you can see that the drop is not one that happens every year because of a holiday or a trend.
- In the same filter, on the Compare tab, choose Compare last 3 months year over year. Check the tabs to see whether the change happened only for specific queries, URLs, countries or devices.
- If impressions stay the same while clicks fall, the guide says the page title and snippet may not be as good as they could be. In that case, look at the title before rewriting the body.
- If the problem is spread across the whole site, look at the Page indexing report; if the drop affects only a group of pages, inspect a few of them with the URL Inspection tool. We explain how to read these reports in our Google Search Console guide.
One warning in the guide makes this step even more important: a small drop in position, for example from 2nd to 4th, can reverse without your doing anything. The guide recommends avoiding radical changes if the page is already performing well. Rewriting a page because you mistook a seasonal or small fluctuation for “stale content” risks damaging something that works.
2. Find the candidates in Search Console
Once you know the drop is real, build three lists. All of them come from the same report, on the Pages tab.
| List | How to build it | What it usually shows |
|---|---|---|
| Pages losing clicks | Compare the last 3 months with the previous period and sort the table by Clicks Difference | Pages whose information has aged, whose competitors have got stronger or whose query has changed |
| Pages with impressions but few clicks | Look for high Impressions and low CTR (click-through rate) | Pages whose title and description do not answer the question |
| Pages stuck on page two | Pages at roughly 11 to 20 in the Average position column | Pages on the right topic whose answer is not complete enough |
The 11 to 20 range in the third row is our own working filter, not a Google rule. The report shows the average position of the site’s topmost result, so this is only a first screen. Pick at most five pages from each list, which gives fifteen candidates in all. Do not try to fix them all in the same week; if you work on a few pages at a time you can see what worked.
3. Decide: update, merge, redirect or leave alone
The table below is enough for each candidate. Write the decision and the reason next to it; in three months that record will be useful.
| Situation | Decision | What to do |
|---|---|---|
| The topic is still searched, but the information is out of date or part of the question is unanswered | Update | Refresh the article at the same address |
| Two pages answer the same question | Merge | Keep the stronger one, move over the useful parts of the other, redirect the old address with a 301 |
| The page’s subject has ended (a product is discontinued, a service closed) and there is a close equivalent | Redirect | Send the old address to the closest page with a 301 |
| The drop is seasonal or small and the page is doing well | Leave alone | Watch it once a month |
The diagram below shows the same decision as a sequence of questions.
We use this routine ourselves: in our performance notes we write how each piece is doing against its goal, and we update the ones that do well and merge or remove the ones that fall short. We describe the routine in which every text is read by an editor other than its writer on our content service page.
4. What to change in an update
An update is not changing a word and saving. Google’s helpful content guide asks whether the content provides original information and whether it provides substantial value compared with other pages in search results. Make the update with those two questions in mind:
- The first paragraph. Does it still answer the reader’s question on the first screen? If not, rewrite the first two sentences. The detail is in how to write SEO-friendly content, so we do not repeat it here.
- Information that has aged. Check steps, screenshots, descriptions of rules and policies, product names and links one by one. Remove any figure you cannot verify.
- Missing questions. On the Queries tab, look for questions the page gets impressions for but does not answer; each can become a subheading. To see which words the page is searched with, the Search Console step in how to do keyword research is enough.
- The title. On a page with high impressions and low clicks, rebuild the title around the question. You can check its length with the title and description length checker.
- Your own knowledge. Add an example from the field, a mistake, a measurement. The guide also asks whether, when you draw on other sources, you avoid simply copying or rewriting them.
The address stays the same. If you delete the page and rewrite it at a new address, you have to set up a redirect. The guide has one more warning: adding a lot of new content or removing a lot of older content because you believe it will make the site seem “fresh” will not help.
5. Dates: what Google says
Changing the date on a page you have updated is tempting. Two Google pages should be read together on this.
According to the byline date guide, this date is the date Google estimates the page was published or updated. Google does not rely on a single signal; it looks at several. The guide’s recommendations on this:
- Put a date visible to users on the page and label it with text such as “Publish” or “Last updated”. You can give a publication date, an update date or both.
- In structured data, use the
datePublishedanddateModifiedfields. - Make sure the visible date and the one in the structured data match.
- Do not give a future date; give the page’s publication or update date, and leave out the date of any event described on the page.
- If the wrong date is being picked, reduce the other dates on the page.
The guide also says that Google does not guarantee a date will be shown in search results. The helpful content guide, for its part, lists changing the date of pages to make them seem fresh, when the content has not substantially changed, among the questions where a “yes” is a warning sign. The conclusion is simple: change the page for real first, then update the date. On our site too, the publication date and the update date are shown separately, and the update date is added only after a real revision.
6. Merge two competing pages
If two pages answer the same question, the same query can swing between two addresses in Search Console. We called this cannibalisation in our keyword research guide. Merging goes in this order:
- Put the queries side by side. On the Pages tab, select one page and switch to Queries, then do the same for the other. If the same queries appear for both, the two pages are your candidates.
- Choose which one stays. Usually the one that gets more clicks, has more sites linking to it and has the simpler address stays. That is our own measure, not a Google rule.
- Write one complete page. Move the useful parts of the other page into the one that stays and remove the repetition. The page grows until the question is fully answered.
- Redirect the old address with a 301. Google’s canonical URL guide counts a redirect as a strong signal that the target should become the canonical address. According to the redirect guide, a permanent redirect shows the new target in search results; use a permanent redirect when you are sure it will not be reverted. 301 and 308 are server-side redirects. There is a short explanation of the term in the glossary, and we cover the pitfalls of bulk redirects in keeping SEO through a site rebuild.
- Update the internal links. The same canonical URL guide recommends linking to the canonical address rather than a duplicate when linking within your site. Point the links that go to the old address at the page that stays.
- Fix the sitemap. The canonical URL guide counts sitemap inclusion as a weak signal; even so, the sitemap should contain only the address that stays.
7. Check the result
Google’s guide is clear about timing: some changes can take effect in a few days, others several months. It suggests waiting a few weeks before analysing Search Console again, and says there is no guarantee that changes will have a noticeable impact. So:
- Write down the date of the change, what you changed and the reason from the decision table.
- After a few weeks, compare the same page across two periods of equal length with Compare. If you set the time granularity to weekly, the weekday and weekend difference does not distort the chart.
- If you merged pages, open the old address in a browser and confirm it lands on the page that stays, then watch the queries of that page.
- If the click-through rate has not risen, look at the title again; if the queries have not risen, look again at the answer the content is missing. Do not change both at once; you will not see which one worked.
Common mistakes
- Renewing the date without changing the content. Google’s helpful content guide lists this among its warning signs.
- Radical changes to a page that is doing well. Rewriting a page from scratch because of a small fluctuation in position.
- Redirecting a merged page to the home page. Send the old address to the closest page on its topic.
- Changing everything at once. You cannot separate the cause of the result.
- Leaving internal links on the old address. Even when the redirect works, internal links should go straight to the page that stays.
- Keeping no record. If you cannot remember in three months what was done, the result teaches you nothing.
Common questions
How often should old content be updated?
We do not recommend a fixed interval. Look at Search Console every three months and update the pages that land on the three lists in this article; if the lists are empty, there is nothing to update.
Does updating raise rankings?
There is no guarantee. Google’s guide says there is no guarantee that changes you make will have a noticeable impact in search results; if there is more deserving content, it continues to rank well. The aim of an update is to answer the reader’s question better.
Does a new update date move a page up?
The date is there to tell the reader when the page was published or updated. Google’s guide lists renewing the date when the content has not substantially changed among the warning signs that you should re-evaluate how you create content. Renew the date only as far as you have changed the page.
A small job you can do today: in Search Console, use Last 16 months and Compare to find the first five pages that lost clicks. Write a decision from the table in this article next to each, and apply only one of them this week.
Sources
- Google Search Central: Debugging drops in Google Search traffic
- Google Search Central: Creating helpful, reliable, people-first content
- Google Search Central: Influence your byline dates in Google Search
- Google Search Central: Redirects and Google Search
- Google Search Central: How to specify a canonical URL with rel="canonical" and other methods
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.