What is Google Search Console and how to use it

From adding a property to the sitemap, the four numbers in the Performance report and a ten-minute weekly routine: a guide to setting up and reading Search Console.

· 11 min readSEO

Short answer

Google Search Console is Google’s tool for monitoring and managing how your site appears in Google Search. You add and verify a property, submit a sitemap, then spend ten minutes a week on the Performance report (clicks, impressions, click-through rate, average position) and the Pages report.

Say a freelancer built your site years ago. Today someone asks, “Do you have access to Search Console?”, and the only answer is the Gmail address of a person who has moved on. Google Search Console is the tool where you watch for yourself how your site appears in Google, and who has access matters as much as the reports do. This guide answers what Google Search Console is and how to use it, in order, from adding a property to your first weekly look.

You can work through the sections below in one sitting. This is a tour of the tool and does not go deep into every report. For a line-by-line technical audit, see our technical SEO checklist; for the real records of a site’s first entry into Google, see how a new site gets into Google.

What Search Console is for

Search Console shows how Google found your site, which pages it has indexed and how often your site appeared in which searches. Google Analytics measures what happens after people arrive; Search Console covers the step before, your visibility in Google. The two do not replace each other; you read them together.

The left-hand menu has five places you will use most. First, see which question belongs to which report.

Search Console questions matched to reports: which report answers which question Your question The report to open How many people clicked through? Performance Is this page on Google? Pages and URL Inspection Does Google know my addresses? Sitemaps Who links to us? Links How do I announce a new page? URL Inspection Search Console questions matched to reports: which report answers which question How many people clicked through? Performance Is this page on Google? Pages and URL Inspection Does Google know my addresses? Sitemaps Who links to us? Links How do I announce a new page? URL Inspection
Figure: five questions and the Search Console report to open for each, as listed in its left-hand menu.

1. Add the property: domain or URL prefix

Search Console works in units called “properties”. To add your site, open the property selector on any page and choose “+ Add property”. According to the Help page, adding a property does not affect your site in Google Search, and abandoning the setup halfway does it no harm. There are two property types:

Domain property URL-prefix property
What you enter example.com (no protocol, no path) A full prefix such as https://www.example.com/
What it covers All subdomains of the domain and both http and https Only addresses with that exact prefix and protocol
Verification DNS record only Several methods
When to choose it You want all of the site’s data in one place You want to track a folder or a single protocol separately

Help’s own example: a URL-prefix property for http://example.com/ does not cover addresses starting with https:// or www., while a domain property for example.com covers all of them. For most sites a domain property is the right start. Adding a DNS record is done in your domain provider’s panel, so do this step together with whoever has access to it.

2. Verify ownership

To add a property you must prove you own the site. The setup wizard lists the verification methods that suit your site; for a domain property the option is a DNS record. If you cannot verify, the Help page suggests something else: ask an existing owner of the property to grant you access. Someone who is not an owner can see the reports with the owner’s permission.

3. Submit the sitemap

A sitemap is a file that tells Google which pages on your site it should know about (what a sitemap is). Submitting it is short work:

  1. Make sure the sitemap is live on your site (usually example.com/sitemap.xml).
  2. Open the “Sitemaps” report from the left-hand menu.
  3. Paste the address into the “Add a new sitemap” box and press “Submit”.
  4. Check that the status says “Success”; if not, click the row and read the error.

Note three things. According to the Help page, “submitting” does not upload the file to Google; it tells Google where the file is. The sitemap is fetched at once, but crawling the listed addresses can take time. If you use a hosting service such as Wix or Squarespace, the sitemap may be managed for you. And a small site of about 500 pages or fewer, where every page can be reached by following links from the home page, most likely does not need a sitemap. Submitting one does no harm, though, and the report will show you errors.

4. The Performance report: four numbers

The Performance report shows how your site is doing in Google Search results. The default view covers the last three months. Four metrics sit above the chart:

Metric Definition on the Help page How to read it
Clicks How many times a user clicked your site from Search results Visitors who actually came
Impressions How many times your site appeared in Search results Visibility
CTR (click-through rate) Clicks divided by impressions What share of appearances turned into a click
Average position The average position of the topmost result from your site A smaller number means higher up

The tabs under the chart split the same data by queries, pages, countries, devices and dates. One caution: even if a query appears in your list, running the same query yourself may not show your site, because, according to the Help page, results depend on the searcher’s time, place, device and history. Judge by the report’s totals, because single searches mislead. Seeing which queries have no matching page is a free starting point for keyword research. We explain how to rewrite the title of a page with a low click-through rate in our guide to title tags and meta descriptions.

5. The Pages report: reading the reasons in general

The Pages report splits the addresses Google knows into “indexed” and “not indexed”, and lists the not-indexed ones by reason (what indexing is). The “not indexed” count can look like red at first glance, but it is often no cause for alarm: the Help page says not to expect every address on your site to be indexed, because only canonical versions are. If you see “Not found (404)” or “Soft 404” rows, 301 redirects and 404 errors explains what to do.

Look at the reasons with three questions:

  • Is this address an important page? For a thank-you page, a basket or an old redirected address you need to do nothing.
  • What does “Source” say in the reason table? According to the Help page, you can fix only the issues whose source is “Website”.
  • Is the reason there on purpose? An address blocked by robots.txt, for example, is often blocked deliberately.

For what each reason means in detail, see the table in the technical SEO checklist. After fixing an issue, one press of “Validate fix” on the issue page is enough; the Help page asks you not to click it again until validation has succeeded or failed.

6. URL Inspection and requesting indexing

If you paste an address into the search box at the top, the URL Inspection tool shows what Google holds for that page. The first result is not a live test; it is the record in Google’s index. To test the page as it is now, use “Test live URL”. For a new or updated page:

  1. Inspect the address.
  2. Click “Request indexing”.
  3. Wait, and follow the result in the same tool.

The Help page’s warnings are clear: sending a request does not guarantee the page will appear in the index, and the number of requests per day is limited. For many pages the best route is a sitemap that marks updated pages with lastmod. The wording “URL is on Google” does not guarantee the page will show in search either. So do not send the same address again and again.

The Links report shows links to your pages from other sites and links inside your own site. Under external links you see your most-linked pages, the sites that link to you most and the most-used link text; under internal links you see how many links your own pages give each page. The Help page states two limits: the report shows a sample rather than every link, and tables are capped at 1,000 rows. So do not conclude “we have this many links” from it. Confirming that your home page and contact page receive internal links, on the other hand, is directly useful.

Who should be an owner

Set two rules before you hand out ownership:

  • Have at least two owners: one from your company and, if there is one, one from the agency or developer who runs the site. Then one person leaving does not shut off access.
  • Give people who only need to look a narrower user permission instead of ownership. You manage roles from the property’s user settings.

Write down whose account created the property. You will need that when you change agency or an employee leaves.

A ten-minute weekly routine

Instead of opening the tool and wandering, follow a fixed order:

  1. Performance (3 min): Compare the last 28 days with the previous period. Is there a sudden drop in clicks or impressions?
  2. Queries and pages (3 min): Note the top three queries and pages that get impressions but few clicks.
  3. Pages report (2 min): Is there a new jump in “not indexed”, or a new reason heading?
  4. Sitemaps (1 min): Does the status still say “Success”?
  5. New publications (1 min): If you published a page this week, check its status with URL Inspection.

Let the output be a three-line note; the Monday report is the regular form for that note. For the monthly summary, see our SEO report guide.

Common mistakes

  • Adding the property but skipping verification. The report stays empty and nobody looks for the reason.
  • Adding only the www or only the http prefix. The data for the other versions stays invisible.
  • Leaving a single owner. When that person leaves, access goes with them.
  • Trying to bring the “not indexed” list to zero. The aim is for the canonical version of each important page to be in the index, not for every address.
  • Sending indexing requests for the same page over and over. It guarantees nothing and uses up the quota.
  • Reading average position as the rank of one search. The chart value is the average of the topmost positions of your site’s results.

Common questions

Does adding a property to Search Console affect my site in Google?

No. According to the Help page, adding a property does not affect your site in Google Search, and leaving the setup unfinished does not harm the site; the tool only lets you monitor your site’s performance in Google.

Should I choose a domain property or a URL-prefix property?

If you want every version of the site in one place, choose a domain property, but you can verify it only with a DNS record. If you cannot reach the DNS panel, or you will track only one folder, a URL-prefix property works.

How often should I look, and can I trust the latest day’s data?

The newest data in the Performance report can be preliminary and may change within a few hours, so do not decide on yesterday’s number. Looking once a week is enough to catch a sudden drop or a new problem; look again after any big change to the site.

One thing you can do today: open Search Console, look at the property’s user list and write the owners’ names on a piece of paper. If one of them no longer works on your site and nobody else is an owner, adding a second owner is this week’s first job. If you would like help reading the reports together, see our SEO service, and try the free SEO analysis on your own site.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.