How to prepare and read an SEO report

From the four numbers in Search Console to key events from organic search in GA4: the seven parts of a monthly SEO report a manager can read.

· 13 min readSEO

Short answer

A monthly SEO report a manager can read starts with one question and has seven parts: clicks, impressions, CTR and average position from the Performance report; branded and non-branded queries; changed pages; Page indexing status; GA4 key events from organic; what was done and next month’s decision.

Picture this: the marketing manager of a hypothetical accounting-software company receives a file called “SEO report” from the agency on the first day of the month. It runs to many pages. The first page carries an “authority score” calculated by a tool vendor, followed by a ranking table of hundreds of keywords. The manager has one question to take to the managing director: “Did demand from Google go up, what was done this month, and what happens next month?” The file does not answer it. This article answers how to prepare and read an SEO report for a manager, using the definitions on the Search Console and GA4 help pages. The company and the numbers are invented; we use them only to show how to read the figures.

We explained Search Console itself in our Search Console guide and the weekly short report in the Monday report. Here we focus on the monthly report.

The seven parts of the report

The monthly report has seven short parts. The figure below shows where each part comes from; the parts follow the same order as the steps in this article.

The seven parts of a monthly SEO report and the data source of each Report part Data source 1 This month’s question and a one-sentence answer Report author 2 Four metrics: clicks, impressions, CTR, average position Search Console Performance report 3 Branded and non-branded queries Search Console Performance report 4 Queries and pages that changed Search Console Performance report 5 Indexing status of the important pages Search Console Page indexing 6 Key events from organic search GA4 Key events 7 What was done this month and next month’s decision Report author The seven parts of a monthly SEO report and the data source of each 1 This month’s question and a one-sentence answer Report author 2 Four metrics: clicks, impressions, CTR, average position Search Console: Performance report 3 Branded and non-branded queries Search Console: Performance report 4 Queries and pages that changed Search Console: Performance report 5 Indexing status of the important pages Search Console: Page indexing 6 Key events from organic search GA4: Key events 7 What was done this month and next month’s decision Report author
Figure: The seven parts of a monthly SEO report; the numbers in parts two to six come from Search Console and GA4, and the report author writes parts one and seven.

1. Put the question and the answer at the top

Make the first line of the report a question and the second line a one-sentence answer to it. An example question: “How did demand from organic search change this month compared with last month, and why?” If you cannot write the answer, the report is not ready.

According to the FAQ on our service page, we do not report organic traffic on its own; we report enquiries from organic search such as forms, phone calls, quote requests or sales. In our monthly enquiry report, the pages that brought those enquiries, what was done that month and the decision for the next month are written down. Ranking changes also appear in the report, but they are not the main measure. To choose which numbers to follow, see our guide to marketing KPIs.

2. Four metrics from the Performance report

According to Search Console Help, the Performance report shows important metrics about how your site performs in Google Search results. We gave Help’s definitions of the four metrics in the table in our Search Console guide; the table below shows how we suggest writing each of them into the report.

Metric Place in the report (our suggestion)
Clicks This month and last month side by side
Impressions On the same line, next to clicks
CTR (click-through rate) As calculated, for both months
Average position At the bottom, with a comment

For a monthly report you can consider the Monthly time granularity; Help says the Weekly and Monthly views smooth out daily fluctuations such as those caused by weekends or holidays, which helps with analysing longer-term trends. Help also says the newest data can be preliminary, meaning it may change within a few hours. The data discrepancies page says collected data is usually available in 2 to 3 days. Our suggestion is to prepare the report after the first two or three days of the month have passed.

The chart totals and the table totals may also differ. Among the reasons Help lists: the table can show a maximum of 1,000 rows, and on the Queries tab anonymised (rare) queries are omitted from the table but included in the chart total unless a query filter is applied. Our suggestion is to take the monthly total from the chart and use the table for row-by-row comparison.

Let us read a hypothetical example. The same company had 18,000 impressions last month and 20,000 this month; clicks fell from 720 to 600. Calculating CTR gives 720 / 18,000 = 4% last month and 600 / 20,000 = 3% this month. Our interpretation is that clicks falling while impressions rise suggests the problem is not how often the site is shown. Help says a low CTR can indicate that users see the page in Search results but do not think it answers their query. To find such pages it suggests sorting the table by CTR in ascending order on the Pages tab. For low-CTR pages it suggests considering updating the title and description or adjusting the content to match the queries better.

Why average position misleads

Help defines average position as “the average position of the topmost result from your site”. In the chart, the value is the average position of the topmost result from your entire site; in the table, it is the average position for the specific URL or grouping dimension in that row. Help’s own advice is clear: in general, it recommends focusing more on trends in impressions and clicks than on position alone.

Our inference is this: because one number combines many queries and pages, the average can get worse if the site starts to appear, even far down, for new queries where it never appeared before, even though impressions are rising. So do not leave position on its own in the report; put the impressions and clicks trend next to it, and if it needs explaining, drill down to the query or page level.

3. Separate branded and non-branded queries

The query filter in the Performance report splits traffic into two groups. According to Help, branded queries include your brand name, your domain or a brand-specific product or service, and this includes common misspellings and variations. Non-branded queries do not include your brand name and are often more general. Help says branded traffic often comes from users already familiar with your site, while non-branded traffic can indicate new audience growth.

Write two lines in the report: branded clicks and non-branded clicks, each with last month for comparison. Note the limits Help gives: the filter provides data starting from 11 March 2025, and it is not available for sub-properties or for sites with a low number of impressions. If the filter is not available for your site, our suggestion is to separate the queries containing your brand name by hand with the query filter.

4. Find the queries and pages that changed

To see queries or pages with significant change from a previous period, Help suggests sorting by the Difference column. Write the three pages that rose most and the three that fell most into the report, each with a one-line note. Be careful with the note. Help says it can be difficult to determine whether a specific change to a page directly caused an improvement in Search performance. The reason it gives is that other events, such as periodic changes in user sentiment, news events or improvements to a competing site, can also contribute. Our suggestion is to say “this coincides with that change” or “we do not yet know the cause” instead of writing the cause as if it were certain.

5. Technical health from the Page indexing report

For technical health, look at the Page indexing report in Search Console with a single question: are my important pages indexed? According to Help, most sites have at least a few unindexed pages, but all of your important pages should be indexed. The same page says not to expect every URL on your site to be indexed. It also says that URLs left out for legitimate reasons, such as a robots.txt rule, a noindex tag, a duplicate URL or a 404 for a page you removed and have no replacement for, are fine. For each “Not indexed” reason, look at the Source value; according to Help, in general you can fix only issues where the source is listed as “Website”. For sites with fewer than 500 pages, Help says you probably do not need to use this report; on a small site this part can be a single sentence.

Write these into the report: the status of the important pages, the name of any new reason that appeared during the month, and the fix that was made. For a line-by-line audit use the technical SEO checklist; a short definition of the term is in the glossary.

6. Key events from organic search in GA4

According to Analytics Help, a key event is an event that measures an action that is particularly important to the success of your business. According to the same page, any event you collect can become a key event, but you are the one who marks it as one. Many reports, such as Landing pages and User acquisition, include a Key events column showing how many times users triggered key events. A short explanation of the term is in the glossary; we explained how to read the reports in the GA4 reports guide.

Our suggestion is to narrow the rows in these two reports to the organic search channel and to write two numbers into the report: the total key events from organic search and the three landing pages that brought the most. Our inference: if no event is marked as a key event, there is nothing to show in the column, so fix the measurement setup first.

Why Search Console and GA4 numbers differ

If you put the two on the same line, a manager will ask, “Clicks are 600, so why is the session count different?” The data discrepancies page in Help lists the reasons why Search Console data can differ from tools such as Google Analytics:

Reason What Help says
Privacy The Performance report does not show all data; some queries searched a very small number of times are omitted
Processing Processing of the source data, for example to eliminate duplicates, might cause stats to differ
Time lag There can be a lag between when the numbers are calculated and when they are visible; collected data is usually available in 2 to 3 days
Time zones Except in the 24-hour view, the Performance report tracks and labels daily data in Pacific Time
JavaScript Some tools, such as Google Analytics, track traffic only from users who have enabled JavaScript in their browser

Our suggestion: do not add the two sources together, do not expect one to confirm the other, and write the source next to every number. Search Console describes visibility and clicks; GA4 describes what happens after people reach the site.

7. Write what was done and next month’s decision

The last part matters most to a manager. Write three things: the work completed this month (a page published, a technical fix made), whether it shows in the numbers, and a single decision for next month. On whether it shows, remember the warning above: Help suggests checking whether an improvement coincides with your site changes by comparing with similar periods in the past, and says annotations can add context to charts. If the decision is written with an owner and a date, whoever opens the report next month knows where to continue. For the weekly routine, see the Monday report again.

Leave these out of the report

  • Presenting tool vendors’ authority scores as real measures. The Performance report’s metric list in Help has four metrics: clicks, impressions, CTR and average position. Our view is that if a tool score is used, its name, its source and the fact that it is the tool’s estimate should be written next to it, and no decision should rest on it alone.
  • The position you see in your own search. According to Help, even if a query appears in your list, you might not see your site in results if you run the same query. This is because results are specific to the time, place, device and recent history of the person searching.
  • The newest days, which carry preliminary data. According to Help, the newest data can be preliminary and is shown with a dotted line on the chart; close the report on complete days.
  • Clicks and sessions presented as each other’s difference. The table above shows why the two numbers can part ways.

Common questions

How long should an SEO report be?

In our view this seven-part layout fits on one page. For readers who want detail, screenshots and long tables can be kept in a separate appendix. This is our own practice.

Average position fell: should I worry?

First look at the trend in impressions and clicks; Help recommends focusing on those two trends more than on position. Then open the Queries and Pages tabs to see which rows changed position. Position is an average.

Is a monthly report enough, or do I need a weekly one too?

Help notes that the Monthly view smooths out daily fluctuations. For ongoing work a short weekly note also helps; we described it in the Monday report. As we write on our service page, new content usually takes months to show up in search; that is why we suggest making the big decisions in the monthly report.

There is a small job you can do on your own today: open the Performance report, compare last month with the month before, and write a one-sentence answer: “Organic search did … this month because …”. If you cannot write the second half of the sentence, put “we do not know” in the report where you cannot; that will be the most honest line in your first SEO report. If you would like to hand the report to an agency or have an agency’s report checked, see what our SEO service covers.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 14 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.