Short answer
When a marketing email lands in spam, check in this order: the type of symptom, the SPF and DKIM records, the spam rate in Postmaster Tools (target: below 0.1%), list health, one-click unsubscribe and a gradual rise in sending volume. Each step builds on the one before.
After Friday’s campaign goes out, a few customers write “your email ended up in my spam”, while the tool’s dashboard says the messages were “delivered”. Our reading: the “delivered” status usually tells you the recipient’s server accepted the message, not which folder it went to. Email deliverability is about closing exactly that gap: the message being accepted, and then reaching the inbox.
This article covers what to check, and in what order, when marketing emails land in spam. We do not repeat the domain record setup here; that is in how to set up SPF, DKIM and DMARC. For a short definition of the term, see deliverability in the glossary.
1. Tell the symptom apart first
“It goes to spam” can stand for three different problems, and each has a different first place to look. Google’s FAQ says that messages that do not meet the sender requirements can be turned away with a temporary or permanent failure code, or sent to the spam folder. The table below pairs each symptom with a likely cause; the error codes in the first two rows appear on that page.
| Symptom | Likely cause | First place to look |
|---|---|---|
| Message turned away with a temporary failure, error code 4.7.23 | The sending IP has no PTR record, or it does not match the forward DNS record | DNS settings at your server or sending-tool provider |
| Message turned away with a temporary failure, error code 4.7.30 | DKIM authentication does not pass | The DKIM setting in your sending tool |
| Messages accepted but in spam | Authentication, complaint rate or reputation | Postmaster Tools (steps 3 and 4) |
| Only one particular send is a problem | That send’s list or content | The recipient segment of that campaign and its unsubscribe count |
Sending test messages to your own account and to a few accounts at different providers, then checking the folders, is useful. But a single test is not a result; Postmaster Tools shows the data of real recipients.
2. Check the authentication records
Gmail’s sender guidelines ask everyone who sends to Gmail accounts to set up SPF or DKIM. From those who send more than 5,000 messages a day, they ask for all three: SPF, DKIM and DMARC, where the DMARC policy can be none. For bulk senders the domain in the “From:” field must align with the SPF or DKIM domain.
The job in this step is not to write new records but to check the current state: does each sending tool sign its messages, and is your sender list up to date? The order of setup and the usual mistakes are in the SPF, DKIM and DMARC article linked above.
3. Set up Postmaster Tools
Instead of guessing, look at the data Gmail shows you. According to Google’s setup page, the steps are:
- Sign in to Postmaster Tools and click Add new domain.
- Enter the DKIM (
d=) domain or the SPF (Return-Path) domain. - Verify ownership by adding the TXT or CNAME record you are given to your DNS.
The page states two limits: the tool covers only messages sent to personal Gmail accounts, and it shows no data until your domain is verified. Google’s dashboards documentation also says that on days when volume is low, data may be incomplete to protect user privacy. Read the dashboards like this:
| Dashboard | What it shows | What to do |
|---|---|---|
| Spam rate | The percentage of messages recipients mark as spam by hand | Target below 0.1%; step 4 |
| Domain and IP reputation | A Bad, Low, Medium or High rating | If low, find the spam source and wait for it to recover |
| Authentication | SPF, DKIM and DMARC results | Step 2 for messages that slip through |
| Compliance status | Whether the sender requirements are met | Close the “Needs work” rows |
| Feedback loop | Campaign messages marked as spam | Which send draws the complaints? |
The document defines the reputation levels like this. A domain rated Bad has messages that are almost always marked as spam or rejected; Low is likely to be marked as spam. Medium describes a legitimate sender who occasionally sends spam. High means a history of very low spam rates and compliance with the guidelines. It also says the changes you make can take up to 7 days to show in the Compliance status dashboard.
4. Bring the complaint rate below 0.1%
The spam rate is the most important number on the dashboard. According to Google’s FAQ, the rate is calculated daily; the user-reported rate should stay below 0.1% and should never reach 0.3% or higher. The same page says that even rates above 0.1% hurt inbox delivery for bulk senders.
When the rate climbs, work through this list:
- In the Feedback loop dashboard, find which type of send draws the complaints.
- Narrow the segment you send that type to; drop people who have never engaged.
- Check whether the subject line and sender name match the content. The subject line article covers this in detail.
- Bring the frequency back to what you promised at sign-up.
One trap to watch for. According to the dashboards document, the rate shown is based on messages that reached the recipient’s inbox and were marked there. If Gmail is already sending many of your messages to spam, the rate can look lower than it really is. So do not read the rate alone; our suggestion is to judge it together with the reputation and authentication dashboards.
Yahoo’s sender requirements follow the same line: the spam rate must stay below 0.3%, and it is calculated against the messages delivered to the inbox. If you enrol in Yahoo’s complaint feedback loop (CFL), you can get a copy of the complaint when a user reports a message as spam.
5. Clean the list
The source of complaints and low engagement is often the list itself. Gmail’s guidelines tell you to send only to people who want to hear from you; they are less likely to report your messages as spam. Yahoo likewise tells you to avoid bought lists and signing people up with a pre-ticked box, and to use double (confirmed) opt-in for new subscribers. The dashboards document points the same way: have subscribers confirm their address, ask now and then whether they want to stay subscribed, and consider unsubscribing people who do not open or read your messages.
You can apply this as follows (this order is our suggestion):
- Remove bounced addresses straight away; Yahoo asks for invalid recipients to be removed promptly.
- Send people who have been inactive for a long time a single reconfirmation email asking whether they want to stay. Set the period by looking at your own past numbers.
- Move those who do not reply off the main sending list.
- Use double opt-in for new sign-ups.
How to build and grow the list is in how to grow an email list, and cleaning the records you already hold is in how to clean customer data.
6. Make unsubscribing easy
Under Gmail’s guidelines, for senders of more than 5,000 messages a day, marketing and subscribed messages must support one-click unsubscribe and carry a clearly visible unsubscribe link in the body. For one-click unsubscribe, two headers are added to the message: List-Unsubscribe and List-Unsubscribe-Post: List-Unsubscribe=One-Click. Most email tools switch this on in their settings; check the tool’s help page to see whether yours has.
Timing matters too. Google’s FAQ asks for unsubscribe requests to be honoured within 48 hours; Yahoo says 2 days. The table below puts the bulk-sender requirements of the two providers side by side:
| Requirement | Gmail (more than 5,000 messages a day) | Yahoo (bulk senders) |
|---|---|---|
| Authentication | SPF, DKIM and DMARC | SPF, DKIM and DMARC with at least p=none |
| Spam rate | Below 0.3%, target below 0.1% | Below 0.3% |
| One-click unsubscribe | Required, with a visible link | Required, with a visible link |
| Time to honour unsubscribes | 48 hours (FAQ) | 2 days |
| Alignment | “From:” aligned with the SPF or DKIM domain | The same |
Yahoo also recommends not sending marketing messages from the same IP or DKIM domain as transactional messages (order confirmations, password resets), because each IP and DKIM domain has its own reputation.
7. Raise sending volume gradually
A new domain, a new tool, or a big send after a long silence is the classic way to lose reputation. Google’s guidelines say to increase volume slowly: start with a low volume to engaged users, send at a steady rate, and avoid sudden spikes. As an example, they say suddenly doubling previous volume could lead to rate limiting or a drop in reputation. If messages start bouncing or being deferred, they advise reducing volume until the SMTP error rate falls, then raising it slowly again.
Turning that principle into a schedule is our suggestion: make the first send to the segment that clicked most recently, read the results (spam rate, bounces), and only then add the next segment. Check the dashboards before each new segment. When you change the sending format or infrastructure, increasing the changed part separately is also in the guidelines.
Common mistakes
- Blaming the content first. Before you swap words in the subject line, look at the spam rate and the authentication dashboards.
- Trusting the open rate. Google does not track open rates and cannot verify the open rates that third parties report.
- Growing the segment that draws complaints. If the rate is rising, sending more makes the problem bigger.
- Mixing marketing and transactional messages. Keep order confirmations from being affected by a campaign’s complaints.
- Switching tools without updating the records. An old sender list does not recognise the new tool.
- Expecting results straight after a fix. The dashboards document allows up to 7 days for improvements to show.
Common questions
How long does it take to get out of the spam folder?
We cannot give a fixed number of days, because the sources do not. Google says a high spam rate increases spam classification, and that an improvement in the rate takes time to show in classification. The dashboards document says to wait up to 7 days after fixes for the spam rate to reach a compliant level.
Do these rules apply to a small business that sends fewer than 5,000 emails a day?
In part. Gmail’s requirements for all senders include SPF or DKIM, valid DNS records, TLS and a spam rate below 0.3%. The DMARC and one-click unsubscribe requirements are for those who send more than 5,000 messages a day. Setting them up from the start is still our suggestion; you will not be surprised when the list grows.
Does a low open rate mean my email is in spam?
Not always. Google says low open rates are not necessarily an accurate indicator of deliverability or spam classification problems. More reliable signals are the spam rate, reputation and compliance status in Postmaster Tools.
One step you can take alone today
Add your sending domain to Postmaster Tools and write the verification record into your DNS; the dashboards show no data until the domain is verified. The same day, send yourself a test copy of your next newsletter, click its unsubscribe link and confirm the request is processed. The first tells you where you stand; the second tells you whether the easiest-to-miss part of the bulk-sender requirements works.
If you would like help with this, our email and CRM service covers deliverability as SPF, DKIM, DMARC and sender reputation monitoring. If we cannot get access to your domain’s DNS settings, we cannot fix deliverability.
Sources
This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 15 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.