How to run an influencer collaboration

From choosing by audience fit instead of follower count to the brief, the written agreement, the advertising label, and measuring with a UTM link and a code: six steps to run a collaboration from start to finish.

· 12 min readSocial media

Short answer

An influencer collaboration runs in six steps: pick a creator whose audience matches your customer, write a one-page brief, settle rights, approval and timing in writing, approve the draft before it goes out, label the post as the Advertising Board guideline asks, and give a UTM link and code. The legal part is a summary; a lawyer should check the agreement.

A fictional ceramics workshop worked with the account that had the most followers a month ago. The post looked good and the likes came in. But the workshop could not answer one question: are these people the audience that would buy our product? The post had no link and no code, the agreement was a few messages, and nobody had said whether the workshop could reuse the content on its own page. Nothing in the post said it was an advertisement, either. How to run an influencer collaboration is the opposite of those gaps: the right audience, a written brief, a written agreement, a clear label and measurement set up in advance.

This article covers the six steps in the figure under five headings; draft approval sits inside steps 3 and 4. For the wider frame, see our guide to writing a social media strategy, and for tagging links in detail, our guide to UTM parameters; we do not repeat either here. The legal parts are a summary and are not legal advice. Have a lawyer check the agreement before you sign it.

A collaboration in six steps: audience fit, brief, agreement, draft approval, labelled post and measurement 1. Audience fit who the viewers are 2. Brief one page 3. Agreement rights, approval, timing 4. Draft approval before it goes live 5. Labelled post the tie is clear 6. Measurement UTM link, code A collaboration in six steps: audience fit, brief, agreement, draft approval, labelled post and measurement 1. Audience fit who the viewers are 2. Brief one page 3. Agreement rights, approval, timing 4. Draft approval before it goes live 5. Labelled post the tie is clear 6. Measurement UTM link, code
Figure: The six steps of an influencer collaboration; measurement is planned from day one, not after the post.

Step 1. Look at audience fit

Follower count tells you how big the account is. It does not tell you whether your customer is there. Choose with these questions:

  1. Who is the audience and where do they live? Ask the creator for a screenshot of the platform’s audience statistics; age, country and interest breakdowns are the first data to compare with your customer description.
  2. Has this person spoken in your category before, and how?
  3. Are there real conversations in the comments, or one-word, near-identical replies?
  4. Would working with you sound natural in the account’s own voice?

Look at past collaborations too: has the creator worked with a brand in your category, and how were those posts received? If they have worked with competitors, ask directly; whether you want exclusivity (no work with competing brands) is decided at the agreement step. Shortlist three candidates and keep a short note on each, so you can answer “why this account?” later. The answers rest on the creator’s own statements, so also read the screenshot and the comments on at least ten posts yourself.

Step 2. Write a one-page brief

A brief draws the frame; it does not write the content. The creator knows their audience better than you do, so leave the voice to them. The page should hold:

  • The aim, in one sentence (for example, introduce a new product or bring visits to the shop page).
  • The one message to get across and what must not be said.
  • The format and number of posts (post, story, video) and the publishing window.
  • Required items: product name, link, code, advertising label.
  • Who approves and how many working days a reply takes.
  • What you ask of the creator: where they will use the link and how they will describe having really tried the product.

If your brand voice is written down, attach it; if not, prepare a short version using the brand voice guide. For the general logic of briefs, see how to write a content brief.

Step 3. Put the agreement in writing

Messages are not an agreement. The table below shows the headings a written agreement should settle and what happens when they are missing. The headings are our suggestion, not a legal checklist.

Heading To settle If left unwritten
Scope How many posts, which format, which platform The two sides expect different things
Content rights Who owns the content, whether the brand may use it on its own account and in ads, for how long Reusing the content becomes a dispute
Approval Who approves the draft, within how many working days, how many rounds of changes Publishing slips or surprise content appears
Timing Draft and publishing dates, what happens if they slip The campaign date moves
Label How the post is shown to be advertising Responsibility stays unclear
Exclusivity Whether the creator may work with competing brands, and for how long A competitor’s post can appear the same week
Measurement Link, code, sharing of results The result cannot be counted
Payment and termination Payment terms, cancellation and removal There is nothing to rely on in a dispute

Be clear on approval too: give the creator enough time to send you the draft before publishing, and write down the number of change rounds. Needless rounds spoil the creator’s voice. Be especially careful with content rights: the content belonging to the creator and the brand being able to use it in an ad are separate matters and should be written separately. If the creator works through an agency or manager, write down who signs. If you work with an agency, ask for the same points in the proposal when you choose a social media agency.

Step 4. Label the collaboration as advertising

A paid post can look like a personal recommendation to the viewer. That is why the commercial tie has to be stated openly. In Türkiye, the Advertising Board of the Ministry of Trade has a guideline on commercial advertising and unfair commercial practices by social media influencers, and the Ministry presented it in an announcement. According to the text, one of the things the guideline rests on is the decision taken at the Advertising Board meeting of 4 May 2021. The summary below follows that text, so check whether a newer version exists. It is not legal advice.

The main rules of the guideline are these:

  • Be open (Article 5). Advertising made through an influencer must be stated clearly and be distinguishable. Covert advertising is banned. If the influencer receives money or a benefit such as free or discounted goods or services from the advertiser, the post must say so with at least one of the wordings in Articles 7 to 10.
  • How the label looks (Article 5). The label must stand out from the post’s colours and background, be easy to read, and be understood at first sight without the viewer doing anything else. If the post carries other tags, the label must be visible among them.
  • The advertiser’s name. In photo and story style posts, the label or statement sits together with identifying information about the advertiser, such as its name, brand or trade name.

Which label goes where depends on the medium:

Medium Article What the guideline asks for
Video platforms such as YouTube, and live streams 7 A written and spoken statement, either throughout the video or in the title, the description or at the start of the relevant part, without making viewers click “read more”. Example: “This video includes a paid collaboration with [advertiser].”
Photo and message platforms such as Instagram, Facebook and Twitter 8 Inside, under or in the description of the post, with advertiser information, a tag such as #Reklam, #Reklam/Tanıtım, #Sponsor, #İşbirliği, #Ortaklık or “collaboration with @[advertiser]”.
Podcasts 9 A written and spoken statement at the start, in the middle and at the end of the episode.
Content visible only briefly, such as stories 10 At least one of the tags or statements, which are the same as those in Article 8, together with advertiser information, for as long as the post is visible.

The guideline sets other duties for the influencer too (Article 6). They cannot present a product they have not tried as if they had. They cannot give the impression of having bought a product the advertiser gave them. While they receive benefits from an advertiser, they cannot give the impression of being only a consumer. If they use a filter or effect in an advertisement for a product, they must say the image is filtered. There are also limits on health claims and on scientific claims that cannot be proved.

Responsibility does not sit on one side only. Under Article 11, the advertiser must inform the influencer about the guideline, ask them to follow the legislation and take measures against breaches; it cannot avoid these duties by saying it is the influencer’s own responsibility. Under Article 12, advertisers, advertising agencies and influencers, whom the text treats as media organisations, are each separately responsible for complying. So write the label clause into the agreement and check it in the draft.

The platforms have their own rules as well. YouTube Help says that videos featuring branded content, sponsorships, endorsements or other commercial relationships must be flagged by selecting the paid promotion option in the video details. Selecting it adds a disclosure label at the start of the video. The same page says that creators and the partners they work with are responsible for complying with the applicable legal requirements. Instagram, TikTok and other platforms also have their own collaboration label tools; read their current help pages before using them. Our suggestion is to use the platform’s tool and also put the wording the guideline asks for into the post text.

Step 5. Set up measurement from the start

Measurement is planned while you write the brief. Two tools work well together:

  1. A UTM link. According to the Google Analytics help page, adding UTM parameters to the destination URL lets you see which campaigns send traffic, and utm_source, utm_medium and utm_campaign should always be used. We suggest naming the campaign after the collaboration, the source after the platform, and giving each creator a separate utm_content value. You can build the link with the UTM link builder.
  2. A code for each creator. It also catches people who see the post, take the code and visit your site later without clicking the link. Give each creator a separate code and ask them not to share it outside the post.

Record the two results separately; they can count the same person twice. Write in the brief how the creator will use the link in a story or profile, because where a link cannot be clicked, only the code gives you measurement. A UTM-tagged link shows the visit under the campaign name in Analytics; to see purchases, conversion tracking must be set up on your site. Use the layout of the social media report to put the result in your monthly report. A sample measurement table (all values are invented):

Creator Link visits Code uses Note
Creator A 120 units 8 units Many clicks, few codes
Creator B 45 units 12 units More codes than link visits

These units only show how to read the table. Creator B’s code may point to an effect that does not go through clicks, but do not treat it as proof on its own.

Do a short review two weeks after publishing: was the aim met, which format brought more visits or codes, how did the creator’s audience react to the product, and what questions came up in the comments? Carry those notes into the next brief. If you want to work with the same creator again, fix the gaps in the first agreement at this stage.

Common mistakes

  • Choosing by follower count and never asking about the audience breakdown.
  • Agreeing by message and leaving content rights, approval and timing unwritten.
  • Leaving the label out of the agreement because “the creator knows”.
  • Over-scripting the product and the text until the creator’s voice is lost.
  • Giving no link or code and leaving the result to a “feeling”.
  • Deciding on one creator’s result after publishing, or giving the same code or link to several creators.
  • Skipping draft approval and noticing a missing label only after publishing.

Common questions

Is a micro-influencer or a large account better?

You cannot tell from the number; audience fit decides. A small account whose audience looks like your customer can suit you better than a large, scattered one, and the reverse is possible too. Decide from the audience data and the quality of the comments; keeping the first collaboration small and looking at the result is also a sensible route.

Do I need an advertising label if I only send a free product?

Under Article 5 of the guideline, a post for which the advertiser provides money or a benefit such as free or discounted goods or services must say so clearly. A gift counts here, and Articles 7 to 10 give wordings such as “I received these products as a gift”. Under Article 6, the influencer cannot give the impression that they bought a product the advertiser gave them. For your own case, ask your lawyer.

How do I compare the results?

Put link visits, code uses and, where you have them, forms or messages in separate columns. Group the creators under one campaign name with separate utm_content values. Read the result against the aim in the brief. If the aim was visits to the shop page, look at link visits; if it was a first sale, look at code uses. If you would rather have this run for you, our social media service page describes what the collaboration work covers.

One step you can take today

Open a one-page brief for a collaboration you have or are considering, and write the eight headings from the table above under it. Any row left empty is a missing clause in the agreement; take it to your lawyer before anyone signs.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 15 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.