How to set up email automation: 4 core flows

Welcome, abandoned basket, post-purchase and win-back: what starts each flow, what its messages are for and what stops it.

· 13 min readEmail

Short answer

Email automation starts with three prerequisites: recorded consent, an authenticated sending domain (SPF, DKIM, DMARC) and shop or CRM data flowing into the tool. Then four flows are built in order: welcome, abandoned basket, post-purchase and win-back. Each flow has one trigger and one exit condition.

On a Tuesday night someone signs up to your shop’s newsletter. Their first email arrives three weeks later, announcing the seasonal sale; by then they have long forgotten the brand. The same week someone else puts two products in their basket, the phone rings at the payment step and they never come back. Nobody writes to either of them, because the sending calendar holds nothing but campaigns. Email automation closes this gap: a flow that is set up once sends the right message unprompted when a person does, or doesn’t do, a particular thing. This article walks through the four flows a shop or a B2B company should set up first, in order.

If you haven’t yet decided which tool to use, read Klaviyo or HubSpot first. The steps here don’t depend on the tool; wherever we give a number, we say which platform’s documentation it comes from.

Three prerequisites before you build a flow

Flows built before the groundwork is ready make the problem bigger: automatic emails go to people without consent, or a well-written series lands in the spam folder.

  1. Consent. Only people with recorded commercial message consent should enter a flow. How to collect that consent, how to record it in İYS and what to do when someone opts out is covered in email and SMS consent in Türkiye; we don’t repeat it here. The one thing you need to know on the flow side is this: consent status should sit as a filter at the entrance of every flow.
  2. Sender authentication. SPF, DKIM and DMARC should be set up in your domain’s DNS records. According to Google’s email sender guidelines, every sender must set up SPF or DKIM. Anyone who sends close to 5,000 messages or more to personal Gmail accounts within 24 hours counts as a bulk sender and must set up all three. The same guidelines require one-click unsubscribe in marketing messages, and ask senders to keep the spam complaint rate below 0.1% and never let it reach 0.3%. Even if you are under that threshold today, flows raise your sending volume; it is safer to set things up as a bulk sender from day one.
  3. Data connection. If the event that starts a flow doesn’t reach the tool, the flow doesn’t run. In a shop these are the list sign-up, checkout started and order events. In B2B they are form submissions, booked meetings and stage changes in the CRM. We showed how the connections that carry data from a form to the CRM are built in business process automation examples.

The six steps every flow follows

The four flows differ in content; the order of setup is the same.

  1. Choose the trigger. Pick the single event or condition that starts the flow. HubSpot splits these into two types: enrolment when an event happens (a form is submitted, for example) or when a record matches filter criteria.
  2. Write down who can’t enter. People without consent, people who ordered in the last few days and people already in another flow should be screened out at the entrance.
  3. Set the exit condition. The flow should stop when the person does the thing you hoped for. A basket reminder sent to someone who has already ordered is the most common flow mistake.
  4. Place the messages and the delays. Give each message one job. Think of a delay less as “how many hours” and more as “what might this person have done in that time”.
  5. Test it on yourself. Open the flow to your own address only at first. Sign up, leave a basket, place an order; check that each message arrives in the right order and under the right name.
  6. Go live and decide on re-entry. Can the same person enter the flow a second time? In HubSpot re-enrolment is off by default, so a person enters a workflow only the first time they match. For recurring events such as a basket reminder you have to switch this setting on deliberately.

The four core flows at a glance

The four flows match four moments in a customer’s relationship with you: getting acquainted, hesitating, the first purchase and going quiet.

The four core email flows: the trigger and the exit condition of each Trigger Flow Exit condition Consented sign-up Welcome Series ends Basket or form left unfinished Abandoned basket Order or form arrives Order completed Post-purchase Series ends or a refund No order for a long time Win-back New order arrives The four core email flows: the trigger and the exit condition of each Welcome Trigger Consented sign-up Exit condition Series ends Abandoned basket Trigger Basket or form left unfinished Exit condition Order or form arrives Post-purchase Trigger Order completed Exit condition Series ends or a refund Win-back Trigger No order for a long time Exit condition New order arrives
Figure: Each of the four core flows starts with a single trigger and stops when the person does what was hoped for or the series ends.

The table below sets out, side by side, the four things that should be written down for each flow at setup.

Flow Trigger What the messages do Exit condition
Welcome The person joined the list with consent Introduce the brand, say what to expect, invite a first step When the series ends; anyone who orders along the way skips the message that asks for the sale
Abandoned basket (B2B: unfinished form) Checkout was started but no order came Remind, then deal with the hesitation When the order or the form arrives
Post-purchase The order was completed Thank, explain how to use the product, ask for a review When the series ends or the order is refunded
Win-back The usual gap between orders has passed with no new order Call back, then send less often if there is no response When a new order arrives

1. Welcome series

Trigger: the person is added to the list with consent. In Klaviyo this is the “Added to list” trigger and, according to Klaviyo’s welcome series guide, lists are double opt-in by default: a person enters the series after confirming their address.

Messages: the first email goes out straight after sign-up and delivers what the form promised; that may be a guide, a code or simply “you’re signed up”. The second message introduces the brand and says how often you will write and what kind of email you send. The third invites the person to take one step: a first order in a shop; a meeting or a case study in B2B. We show how to write each of these messages, with a worked draft, in our welcome email series guide.

Watch out: importing people into the list in bulk sets off the trigger too. Klaviyo’s guide recommends switching the flow to manual sending before an import; otherwise everyone who signed up months ago is queued for the first message in the series.

2. Abandoned basket and unfinished form

Trigger: the person starts checkout and doesn’t order within the set time. This flow only works for people whose email address and consent you already hold; it can’t reach a visitor who never left an address.

Timing: Klaviyo’s abandoned cart guide recommends sending the first message 2 to 4 hours after checkout is started and the second 20 to 48 hours after that; the first delay in the ready-made template is 4 hours. The same guide notes that for expensive products people think over for longer, a longer delay may work better. Treat these ranges as a starting point, then test them against your own data.

Messages: the first message only reminds: the product in the basket, its picture and a link back to the basket. The second addresses the hesitation: delivery, the returns policy, a frequently asked question. Putting a discount in the first message teaches customers to leave a basket and wait.

Exit: a “has not placed an order since starting this flow” filter goes at the entrance of the flow and in front of every message.

The B2B equivalent: there is no basket, only an unfinished step. A known contact who looked at the pricing or service page and didn’t send the quote form, or someone who sent the form and didn’t pick a meeting time. The message doesn’t sell; it answers one question or offers the meeting link again. When the person replies or books a meeting, the flow stops and the sales team takes over.

3. Post-purchase

Trigger: the order is completed. Separate first-time and repeat customers at the start of the flow; a message that introduces the brand suits a first-time buyer and is pointless for someone buying for the fifth time.

Messages: the thank-you message goes out without a delay. Next comes information that is useful once the product is in hand: setting up, care, exchanging a size. The review request is sent once the product has been delivered and enough time has passed to try it; asking for a review of a product that is still in transit costs you trust. We cover how to word the request in our customer reviews guide. The last message can be a suggestion that complements what was bought.

The line to watch: transactional messages such as an order confirmation or a delivery notice are not the same as messages that contain promotion, and they are treated differently when it comes to consent. We explained the distinction in the İYS article; keep every message that contains promotion behind the consent filter.

The B2B equivalent: an onboarding sequence after the contract is signed. Who they will be working with, what happens in the first week and what is expected of them.

4. Win-back

Trigger: more time has passed since the last order than the usual gap between orders. Klaviyo’s winback guide recommends calculating this period instead of guessing it: find the average time between orders for customers who buy again, and make the first delay a little longer than that. A product bought once a month and a product bought once a year can’t share the same win-back flow.

Messages: the first only reminds, and shows what is new. The second offers a reason. The last is an honest question: would you like to keep receiving our emails?

Exit and afterwards: a new order stops the flow. For people who never respond, send less often or stop. Carrying on writing to people who aren’t interested raises spam complaints, and that weakens delivery of the emails going to the customers who are.

How to measure flows

  • Result per flow. In a shop, the orders the flow brings in; in B2B, the meetings booked. Read each flow separately; a total “email revenue” figure doesn’t show which flow is working.
  • Don’t rely on open rate alone. Some email apps count opens automatically. Clicks and results are more dependable.
  • Unsubscribe and complaint rates. If unsubscribes or spam complaints jump after one message, the problem lies in that message’s timing or frequency.
  • Control group. When the list is large enough, keep a small share of people out of the flow. The difference between the two groups is the flow’s real contribution; that way you don’t credit the flow with people who would have ordered without a reminder.
  • One record. The orders shown by the email tool and the orders shown by the analytics tool will differ. Add campaign parameters to links and make sure the purchase event is set up correctly; the steps are in the GA4 setup checklist. To read the result per flow each week, we use the Monday report format.

Common mistakes

  • Going live without an exit condition; sending a basket reminder to a customer who has ordered.
  • The same person receiving the welcome email, a basket email and a campaign email on the same day. Set an order of priority between flows.
  • Setting off the welcome series for old subscribers with a bulk import.
  • Keeping the consent filter on the list only and leaving it off the entrance of the flow.
  • Switching all the flows on the same day. Set one up, watch it for a week, then move on to the next.
  • Never looking at a flow again once it is built. The product, the delivery terms or the price changes, and the message keeps going out as it was.

Setting up the flows, the template system and the tests we run every month are part of our email and CRM service.

Common questions

Which email flow should I set up first?

For most businesses, the welcome series, because it needs the least data: a list and a form are enough. In a shop the abandoned basket flow comes second; in B2B, the follow-up after a form. Win-back comes last, because working out the usual gap between orders takes accumulated order data.

How many emails should a flow have?

There is no single right number. Each message should have a job of its own; take out any message that says the same thing for the third time. Starting with two or three messages and watching the unsubscribe and complaint rate after each one is healthier than starting with a long series.

We treat a basket reminder as a commercial message and send it only to people with recorded consent. Which message falls under which exception is a legal assessment; settle your own case with your lawyer. For the general framework, see our article on İYS and KVKK.

There is one check you can do on your own today: sign up to your own site with a new address, put a product in the basket and leave it at the payment step. Then note for three days what lands in your inbox and at what time. If nothing arrives, you know which flow to build first. If something does, check the sender name, whether it went to the spam folder, and whether the reminder stops once you complete the order.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 10 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.