How to do email marketing: 6 steps from scratch

A permission-based list, a verified sender, a clear content plan and the first welcome message: what to do before the first campaign, in order.

· 10 min readEmail

Short answer

Starting email marketing from scratch takes six steps: build a list with permission, verify your sending domain, decide what to send, write the first welcome message, pick a steady sending rhythm and read clicks, unsubscribes and complaints after every send.

A shop owner opens an account with an email tool, imports the customer spreadsheet and sends the first campaign that same evening. Next day three things happen: some of the recipients find the message in their spam folder, a few write to ask where you got their address, and the tool warns that the sending domain is not verified. The campaign text was not bad; the order was wrong. If you are asking how to do email marketing, the real work is the three preparations to finish before you write the first email. This article walks through six steps for someone starting from scratch, in the order you do them.

Six steps to start email marketing from scratch: three before you send, three once you do Before you send Once you start sending 1 Permission-based list 2 Sender identity 3 Content plan 4 First welcome message 5 Sending frequency 6 Measurement Six steps to start email marketing from scratch: three before you send, three once you do Before you send Once you start sending 1 Permission-based list 2 Sender identity 3 Content plan 4 First welcome message 5 Sending frequency 6 Measurement
Figure: A permission-based list, sender identity and content plan come first; then the first welcome message goes out, the frequency is set and results are measured.

How to build the automatic flows, meaning the welcome, basket and win-back series, is a separate subject that we cover in the email automation guide. This article lays the ground before you get there.

1. Build a list with permission

The list is the one asset in email marketing, and you cannot rent it: it is made of addresses people gave knowingly, on your site, through your form. A bought list, or one borrowed from a friend, sets you back on permission and on reputation alike.

In Türkiye, sending commercial email generally requires the recipient’s prior consent, and the İleti Yönetim Sistemi (İYS) is the national system where those consents are recorded. For how to obtain consent, İYS registration, the KVKK privacy notice and what to do when someone refuses, read email and SMS consent in Türkiye; we do not repeat it here. In practice, while you build the list:

  1. Put a form in at least two places on the site. At the bottom of the home page and at the end of content pages. The checkout page can also carry a separate, unticked box.
  2. Say on the form what they will get. Instead of “Subscribe to the newsletter”, write something like “new products and the most useful guides, twice a month”. You will have to send what you promised.
  3. Ask only for the field you need. For most lists the email address is enough. Adding a name personalises the welcome message; the rest can wait.
  4. Keep the record somewhere you control. Who agreed, when, through which form and to which wording: if the tool stores this, keep it switched on.
  5. Do not import an old customer list blindly. Check the İYS records before sending to addresses whose consent status is unclear. We explain how to tidy the list before importing it in our guide to cleaning customer data.

2. Set up sender identity in plain words

If a mail server cannot tell that a message really comes from you, it leans towards spam. Three records solve this. All of them are written into your domain’s DNS settings; your tool gives you the right values and you add them in your domain provider’s panel.

This table sums up what each record says and when it is needed:

Record In plain words When it is needed
SPF A list of “these servers may send email on behalf of my domain” Every sender needs either SPF or DKIM
DKIM A digital signature showing the message is yours and was not altered Safest to set up together with SPF
DMARC A rule telling the receiving server what to do if SPF and DKIM fail Required for senders of more than 5,000 messages a day

These thresholds come from Google’s email sender guidelines: everyone who sends to personal Gmail accounts must set up SPF or DKIM. Senders of more than 5,000 messages a day to Gmail accounts must set up all three of SPF, DKIM and DMARC. Google’s SPF and DKIM documents give the setup steps; the logic is the same whichever tool you use. For a small list, setting up all three at the start is easier than stopping later to fix things.

Two small rules more. Send from an address on your own domain, and use one that can receive replies instead of “no-reply”; replies to the welcome message are a good signal for you. Every marketing message should carry a visible unsubscribe link. Google’s guidelines also ask for a visible unsubscribe link in marketing messages, and for bulk senders one-click unsubscribe is a requirement. Whether the set-up holds up is tracked under deliverability.

3. Decide what to send

Before the first campaign, write one sentence: why is this list getting email from me, and what does each message promise? The answer should match the promise on the form. Then balance three kinds of content:

  • Useful content: a guide, a checklist, how the product is used. It teaches the reader something or makes something easier.
  • News: a new product, a new service, a sold-out item back in stock, a change of season.
  • Offers: a discount, a limited-time campaign, a pre-order.

A calendar made only of offers soon turns into unsubscribes. Useful and news messages earn you a hearing when the offer arrives. Give each email one job: one main link or button, one subject. If a message tells five different things, none of them gets clicked.

If you are a B2B company, “book a call” or “download the technical specification” takes the place of the offer; the logic is the same. A sales team that knows what customers and people with open proposals are asking is the best source of newsletter topics.

4. Write the first message: the welcome email

A person’s interest is highest in the first minutes after they join the list. So the first message should go straight after sign-up, without waiting for the first campaign. You can start with a single automatic message and leave the full series for later.

A good welcome message does five things:

  1. Says who you are and why you are writing: “Thanks for subscribing to our newsletter.”
  2. Repeats the promise on the form: what you will send and how often.
  3. Hands over anything promised at sign-up, straight away.
  4. Suggests one next step: the most-read guide, the best-selling product or a question.
  5. Comes from an address that can receive replies, under a real name.

Test it on yourself before going live: sign up with a fresh address and check how many minutes the message takes, which folder it lands in and whether the links work. How the later messages form a series, and the exit condition of each, is covered in the automation guide. To write the messages in the series one by one, see our welcome email series guide.

5. Choose a sending frequency

There is no single right frequency; what matters is a rhythm you can sustain and the recipient expects. Our advice:

  • Start from the promise on the form. If you said “twice a month”, send twice a month.
  • Be regular. Choose a rhythm you can keep up all year. After weeks of silence, three emails in a row make it look as if the brand has suddenly appeared.
  • Look at results before sending more. If unsubscribes or complaints rise after an increase, go back.
  • Do not over-engineer the day and time. On a small list, hunting for the best hour only produces noise. Sending at the same day and time is enough for the first months.

Frequency also depends on content: a shop launching new products might send weekly, while a B2B manufacturer with news a few times a year can send less often. The test is the same for both: does the recipient expect the send?

6. Decide what you will measure

After every send, look at the same five indicators. This table sums up what each shows and how to read it:

Indicator What it tells you Watch out
Clicks Whether the subject and call to action worked A more reliable sign of interest than opens
Outcome Orders, forms or meetings that came from the message Invisible unless links carry campaign parameters
Unsubscribes Whether frequency or content is a poor fit A jump on one send points at that message
Spam complaints A mismatch between consent and expectation Google asks for a spam rate under 0.3% in Postmaster Tools
Opens Whether the subject line and sender name are recognised Never decide on this alone

Do not rely on the open rate alone: Apple’s Mail Privacy Protection stops senders learning things such as when and how many times a message was viewed. Opens can therefore be both inflated and incomplete; decide on clicks and outcomes. To test a subject line or send time against that metric, see how to A/B test emails.

To see outcomes, add campaign parameters to every link in the newsletter. Instead of doing it by hand you can use the UTM link builder; the GA4 setup checklist covers the analytics side. We read the figures weekly in the layout of the Monday report.

Common mistakes

  • Sending a campaign to the whole old list on day one, before the preparation is done.
  • Starting with a bought list or one whose consent is unclear.
  • Sending before the sending domain is verified, or using a “no-reply” address.
  • Putting five different subjects and five different buttons in every message.
  • Promising a frequency you cannot keep.
  • Deciding on open rate alone.
  • Comparing tools for weeks without starting to collect a list. Klaviyo or HubSpot can help with the choice; for a small list, correct set-up matters more than the tool’s features.

The whole set-up, meaning İYS integration, domain verification, templates and the first flows, falls within our email and CRM service.

Common questions

How big should the list be before I start?

You can start at any size. On a very small list the percentages swing with a few people, so in the first months look at which message was clicked and which led to unsubscribes rather than at the percentages.

Can I email my old customer list?

First check whether those addresses have commercial email consent. Do not send to those without it, and make sure the ones with consent are recorded in İYS. The details are in the consent article; for your own case we suggest asking your lawyer.

Is a free tool enough to start?

Often it is, because in the first months permission, authentication and rhythm decide the outcome. Make sure the tool lets you verify your own domain and manage unsubscribes.

There is one check you can do alone today: open your tool’s domain verification screen and see whether the SPF and DKIM lines show as verified. Then send a test message to your own address and look at the sender name and the spam folder. If any line is not verified, your next job is the domain record, not the first campaign.

Sources

This article is general information, not legal, financial or technical advice. Platforms, their rules and the law change over time, so some details may have changed since 11 November 2026 or contain small errors. Before you make a decision for your business, check the current official sources or write to us.

Tell us about
your project.

Fill in the form or write to us directly, and we will agree on a day to talk.

Your first meeting is with Deniz Sezer, founder of Detmore.

First meeting free · Reply within one working day · Written proposal in 2 to 3 days · NDA ready

What do you need? pick as many as you like

Name, email and phone are required.

Contact

We reply within one working day.